Log in

Renewable Energy Production

NC-v4.1 EAc5: Renewable energy
posted by Jeff Forward on Jun 5, 2019, 3:02 pm

NC v4.1 talks about offsetting a percentage of greenhouse gas emissions.  How are...

Mixed use projects: Retail credits and Commercial Interiors credits

CI-v4 EQc6: Interior lighting
posted by Eliza Mauro on Jun 6, 2019, 7:17 am

Hi all,

I'm working in a fit out project of a mixed use building that will be a visitor center with retail, exhibition, bar and office areas. We have registered the project as a Commercial...


NC-v4 EAp1: Fundamental commissioning and verification
posted by Tom Kennedy on Jun 5, 2019, 6:39 pm

The Pre-req...

Anyone submitted this for review yet?

Pilot-Credits IPpc93: Prevention through design
posted by emily reese moody on Jun 5, 2019, 3:41 pm

Like Logan's post below, we are pursuing this Pilot Credit, but feel it would be especially useful to know how much information/detail they expect for each line item required. 

Has anyone...

Custom Furniture- Testing as assembly?

CI-v4 EQc2: Low emitting materials
posted by Linda Davisson on Jun 5, 2019, 3:37 pm

We have a project with chairs that meet the emissions testing criteria and have custom upholstery that is GREENGUARD Gold.  Do we include the upholstery as a unique line item on the LEM...

Decorative Window Film; General Emissions required?

CI-v4 EQc2: Low emitting materials
posted by Faun Carlson on Jun 5, 2019, 3:06 pm

Does a pressure applied decorative window film, which will be installed on interior glass partitions need to comply under the WALLS category?

BIFMA Standards

CI-v4 EQc2: Low emitting materials
posted by Kena David on Jan 16, 2019, 5:53 pm

We are trying to fulfill the requirements for EQc2 LEM for our installed furniture. Much of our documentation states compliance with the following:

ANSI/BIFMA X7.1-2011(R2016) and ANSI/...

Last reply: Linda Davisson, Jun 5, 2019, 1:40 pm

Indoor Air Measurements

EBOM-v4.1 EQc1: Indoor Environmental Quality Performance
posted by Gustav Alfaro on Jun 5, 2019, 12:20 pm

Hi to all:

We are certifying an existing 10 story core and shell office building, with up to 4 tenants per floor. It is not clear how many indoor air measurements (...

Any Benefit to On-Site Solar Generation for a Materials Supplier

NC-v4 MRc3: Building product disclosure and optimization - sourcing of raw materials
posted by Daniel Chiotos on Jun 5, 2019, 9:03 am


     I am a solar project developer working with a...

site development

Guide to Exemplary Performance Points in LEED-EBOM v4
posted by Ramkrishna kashyap Kashyap on Jun 5, 2019, 7:02 am