Log in

MRc1 Option 3

NC-v4 MRc1: Building life-cycle impact reduction
posted by Barbara Clarke on Jun 6, 2019, 4:07 pm

We have the calculations sf for our existing exterior...

Renewable Energy Generation

ND-v4 GIBc11: Renewable energy production
posted by Jeff Forward on Jun 5, 2019, 2:45 pm

This credit requires a certain percentage of...

Last reply: Eliot Allen, Jun 6, 2019, 12:08 pm

Local utility using green power sources

NC-2009 EAc6: Green Power
posted by Emily Purcell on Sep 25, 2018, 5:07 pm

Curious if anyone has submitted this strategy, successfully or not, or has any other insight - I took over this project after construction documentation was finished so I'm not sure what the...

Last reply: Allison Smith, Jun 6, 2019, 10:31 am

Renewable Energy Production

NC-v4.1 EAc5: Renewable energy
posted by Jeff Forward on Jun 5, 2019, 3:02 pm

NC v4.1 talks about offsetting a percentage of greenhouse gas emissions.  How are...

Mixed use projects: Retail credits and Commercial Interiors credits

CI-v4 EQc6: Interior lighting
posted by Eliza Mauro on Jun 6, 2019, 7:17 am

Hi all,

I'm working in a fit out project of a mixed use building that will be a visitor center with retail, exhibition, bar and office areas. We have registered the project as a Commercial...


NC-v4 EAp1: Fundamental commissioning and verification
posted by Tom Kennedy on Jun 5, 2019, 6:39 pm

The Pre-req...

Anyone submitted this for review yet?

Pilot-Credits IPpc93: Prevention through design
posted by emily reese moody on Jun 5, 2019, 3:41 pm

Like Logan's post below, we are pursuing this Pilot Credit, but feel it would be especially useful to know how much information/detail they expect for each line item required. 

Has anyone...

Custom Furniture- Testing as assembly?

CI-v4 EQc2: Low emitting materials
posted by Linda Davisson on Jun 5, 2019, 3:37 pm

We have a project with chairs that meet the emissions testing criteria and have custom upholstery that is GREENGUARD Gold.  Do we include the upholstery as a unique line item on the LEM...

Decorative Window Film; General Emissions required?

CI-v4 EQc2: Low emitting materials
posted by Faun Carlson on Jun 5, 2019, 3:06 pm

Does a pressure applied decorative window film, which will be installed on interior glass partitions need to comply under the WALLS category?

BIFMA Standards

CI-v4 EQc2: Low emitting materials
posted by Kena David on Jan 16, 2019, 5:53 pm

We are trying to fulfill the requirements for EQc2 LEM for our installed furniture. Much of our documentation states compliance with the following:

ANSI/BIFMA X7.1-2011(R2016) and ANSI/...

Last reply: Linda Davisson, Jun 5, 2019, 1:40 pm