Log in

Using EMS to calculate some End-Use Energy

NC-v4 EAc3: Advanced Energy Metering
posted by Melissa Crowe on Oct 30, 2019, 6:47 pm

Hi All

We have metering set up for most of the end-uses that represent over 10% of total energy but for some equipment is it not cost effective or practical.

  1. Can we use...

Last reply: Melissa Crowe, Oct 31, 2019, 4:03 pm

LTc5 Quality Transit- is and exemplary performance path avaiable?

CS-v4.1 LTc5: Access to quality transit
posted by Susan Di Giulio on Oct 31, 2019, 3:26 pm

We have a LEED-CS project adjacent to a major regional transit hub and it is actually possible that we could double the 360 wkday trips/216 wkend trips required for 6 points. Is this path from v4...

Can partial regional criteria (e.g. 85% regional) materials count towards regional multiplier?

NC-v4 MRc3: Building product disclosure and optimization - sourcing of raw materials
posted by Summer Gorder on Oct 30, 2019, 4:44 pm

Hi All, 

Can a product meeting one of the basic credit criteria, (...

Last reply: Alara Matsyk, Oct 31, 2019, 9:58 am

Integrated dryer and Water Sense labeled faucet

NC-v4 WEp2: Indoor water use reduction
posted by Elizabeth Floyd on Oct 30, 2019, 12:16 pm

If none of the systems with integrated sink/faucet and hand dryer are available with a Water Sense labeled faucet, does that make the product ineligible for Water Sense labeling? (This is for...

Last reply: Allison Wilson, Oct 31, 2019, 8:19 am

Option 2- Is there still a minimum sample area requirement?

NC-v4 EQc4: Indoor air quality assessment
posted by Daniel Smith on Oct 9, 2018, 4:31 pm

I am quoting to provide Option 2...

Last reply: Barbara Beckmann, Oct 31, 2019, 5:47 am

Extent of daylight simulation model

NC-v4 EQc7: Daylight
posted by Benjamin Weise on Oct 25, 2019, 9:12 am

Hi there!

we are about to undertake the daylight simulation for a 50.000m² building. The way we understand the credit language, the whole building is to be simulated, except non regularly...

Last reply: Benjamin Weise, Oct 31, 2019, 3:24 am

Manufacturing Plant Energy Consumption

NC-v4 EAp2: Minimum Energy Performance
posted by Sofia Barahona on Oct 30, 2019, 3:13 pm

We are working on a project that is pursuing LEED v4: New Construction. This project is a plasterboard manufacturing plant, in which an important part of its energy consumption is produced by...

Last reply: Marcus Sheffer, Oct 30, 2019, 5:50 pm

Walkable Project Site

NC-v4 INc1: Innovation
posted by Rebecca Aarons-Sydnor on Oct 24, 2019, 3:21 pm

We are looking at this for a building that is on a plaza and next to green space (athletic field) and a body of water (lake).  There is only pedestrian and bike access to the building via the...

Last reply: Rebecca Aarons-Sydnor, Oct 30, 2019, 11:44 am

City Potable Water Analysis Reports

NC-v4 WEc3: Cooling tower water use
posted by Saif Abdulameer on Apr 11, 2018, 10:54 am

Can I use the potable water analysis reports from the city utility to calculate the cycles?

Last reply: Rebecca Aarons-Sydnor, Oct 30, 2019, 9:44 am

Impact of Landscaping on Water Consumption

EBOM-v4.1 WEc1: Water Performance
posted by Shri Kiruba on Oct 30, 2019, 8:04 am


It is our understanding that in WEc1-Water Performance, indoor water performance is no longer separated from outdoor water performance. As such, we are finding that existing...