I am using AutoCASE software to pursue the Informing Design Using Triple Bottom Line Analysis Pilot Credit as well as this Pilot Credit.  It is interesting to see the results of the report.&nb

The project team is pursuing this pilot credit after achieving BPDO EPD and HPD credits.

Our firm pursued the Assessment and Planning for Resilience pilot credit for a project in Suffolk, Virginia, to better understand and address local risks like flooding, hurricanes, and ext

We have an industrial hall where a single thermal zone is heated by two separate systems:

We are working on a CI project where the existing glazing performance is unknown.  Is there a conservative, default value the GBCI will accept for use in the daylight simulations?

I found the information relatively easy to find with the documentation provided by the product manufacturers.

Hi,

A proposed case with spot cooling in kitchen/food prep area is mechanically ventilated aswell. The spot cooling is served by PAHU units connected to ODU. 

Hi

On a LEED BD+C: Healthcare project, some perimeter rooms are deeper than 15 ft, and the space continues as a single, undivided room (for example, 30 ft deep).

Hi all,

I've got a question regarding the baseline HVAC system for a datacenter project. Modeling in DesignBuilder and using ASHRAE 90.1 2010.

Hi all,

I've got a question about calculating the pressure drop adjustments for a baseline building. I'm using LEED v4, ASHRAE 90.1 2010.