Log in
Forum
Topic

Scope of this credit

CS-2009 MRc6: Certified Wood
posted by Edwin van Eeckhoven on Dec 7, 2018, 11:06 am

Hi there. I am working on a CS-2009 project. My question is: are the pantry-cabinets (fixed items) within the scope of this credit, or are they considered FF&E and therefore excluded? Thank...

Last reply: Lori Knosalla, Dec 11, 2018, 4:18 pm

On-site energy generation for EAp2 minimum energy performance compliance

NC-2009 EAp2: Minimum Energy Performance
posted by Gurneet Singh on Dec 11, 2018, 7:24 am

Hello everyone,

We are working on campus project with two buildings. For compliance of minimum energy performance, the individual building compliance is required as per multiple buildings...

Last reply: Marcus Sheffer, Dec 11, 2018, 9:57 am

Minimum Required Efficiency out of range

Retail-NC-v4 EAp2: Minimum Energy Performance
posted by Marie Garcia on Dec 10, 2018, 10:43 pm

Hi Marcus,

If the capacity is already out of range stated in ASHRAE 90.1-2010 Table 6.8.1D for  Packaged Air-conditioning system SPVAC - (Cooling Mode) with maximum 240,000 BTU/h, can the...

Last reply: Marcus Sheffer, Dec 11, 2018, 9:51 am

EQc3 IAQ Plan non-smoking policy

NC-v4 EQc3: Construction indoor air quality management plan
posted by Marsha Gentile on Oct 11, 2018, 3:06 pm

EQc3 says to "prohibit the use of tobacco products inside the building...."  Does this mean no smoking in the building BEFORE it is closed in (i.e. curtainwall installed) or no smoking once the...

Last reply: Danilo Ilic, Dec 11, 2018, 9:08 am

Projects without exterior areas on the grounfloor

NC-v4 SSc3: Open space
posted by Ricardo Sá on Dec 11, 2018, 4:41 am

Dear All,

In case of projects without exterior areas on the grounfloor (LEED Boundary overlap the building footprint), can only balconies counts to achieve open space activation credit?...

Last reply: Tristan Roberts, Dec 11, 2018, 9:02 am

Problems with the calculator found in the resources tab in the credit library

NC-v4 EQp1: Minimum indoor air quality performance
posted by Maria Porter on Nov 5, 2018, 5:56 am

Hi!

I have a problem using the calculator for ASHRAE that is supposed to be uploaded on LEED Online, nothing happens when I enter values. I have 100 % outdoor air system, using SI-units. I...

Last reply: Dionisio Franca, Dec 11, 2018, 1:54 am

Is carpet included in Low emitting material calculation?

CI-v4 EQc2: Low emitting materials
posted by shashank gangil on Sep 6, 2018, 11:22 pm

From the LEED v4 CI reference guide, it seems there is no mention of carpet towards low emitting material calculation. But we got certificate from a manufacturer which says it complies with LEED...

Last reply: Amanda Lehman Garvey, Dec 10, 2018, 3:20 pm

For Composite Wood- is CDPH the same as CARB?

CI-v4 EQc2: Low emitting materials
posted by Amanda Lehman Garvey on Dec 10, 2018, 3:18 pm

I'm looking at a composite...

Option 3. building and material reuse

CS-v4 MRc1: Building life-cycle impact reduction
posted by Guillaume Rose on Dec 10, 2018, 9:01 am

Hi, 

I would like to know how to count the surface of material reused.

For exemple, in my project, on the floor, i have a subfloor with carpet on it. I have to count the surface of...

Last reply: Tristan Roberts, Dec 10, 2018, 2:48 pm

Application of re-use of materials

CS-v4 MRc1: Building life-cycle impact reduction
posted by Junaid Khan on Aug 8, 2018, 3:20 am

Hi,

Is there any constraint on the application of re-use of material?

For Example: If a concrete that was used in...

Last reply: Tristan Roberts, Dec 10, 2018, 2:46 pm