Hello,

Hello all,

Hi, 

Hello, 

We are working on a major renovation project that contains several split system AC units which will be replaced.  The owner doesn't have any record of the refrigerant volume that was charged f

Hi all. In the LEED form, the R32 refrigerant is not on the list. How to put it in form? Since its HFC refrigerant, the closest one is R410A, but R32 has better GWP number. 

Hi all, 

We have a project served by a District Energy Plant.  The project has three Dx Mini split systems that are specified as standby systems and would only come on in case the chilled water plant i

Dear all,

The LEED reference guide is quite misleading when it comes to commercial refrigeration systems.

Hi all,

We have dozens of refrigeration/freezer units with Low-Impact refrigerants. R-170, R-290, R-600a. The template doesn't offer this option.

Hello,

I am working on a New Construction project - a community center, certifying under LEED v4. 

Project: 3-story student housing in Danville, KY

Hello,

I am working on a New Construction project - a community center, certifying under LEED v4. 

We are trying to pursue enhanced refrigerant management  credit for our project which is a manufacturing facility.

The refrigerant used on my project is not listed in the LEEDv4 form and as recommended on the FAQ section for this credit I am using the LEEDv2009 form to document compliance.

Hi

To caluclate the Rc-value we need to know the amount of refrigerant and the cooliing capacity. As LEED v4 puts it:

Hello all, 

Are refrigerant GWPr and equipment life (years) typically shown on cutsheets, or are default values sufficient for this credit?

Hi!

Hi,

how can I get access to the refrigerant impact calculation (on Leedonline.com) before registering in order to advice the planners if their selected refrigerant complies?

Hi

In Denmark our chillers are located at the roof, where there in the winter is a risk of freezing. The refrigerant in the cooling units are ammonia.

Project location : Canada

Project type : factory

Hi, 

Does anyone have access to a working LEED Online template? My project is in precertification, forms not yet available.

The ‘Enhanced Refrigerant Management’ credit it mentions a formula to comply with in order to be eligible for the point.

For NC major renovation, when building is served by a campus central chilled water plant, does the central plant's refrigerant characteristics count towards the calculations required for this credi

can someone explain how/why a credit is achieved under the LEEDv4 , enhanced refrigerant management.

Hi, Are fire suppression systems and their OPD and GWP addressed by this credit?