Log in
Forum
Topic

Option 2. Prescriptive Compliance

CI-v4 EAp2: Minimum Energy Performance
posted by Sustainability Provider on Mar 12, 2018, 12:20 pm

We are pursuing for LEED v4 certification for an office space under CI category. The office space consists of 2 floors and have approximately a total...

Last reply: Marcus Sheffer, Mar 16, 2018, 12:46 pm

Including envelope in OPR and BOD when envelope is not part of the CI scope

CI-v4 EAp1: Fundamental commissioning and verification
posted by Elizabeth Powers on Aug 7, 2018, 5:25 pm

Hi folks,

I am trying to clarify how to meet the requirements to include envelope criteria in the...

Last reply: Scott Bowman, Apr 26, 2021, 11:40 am

Permanently Installed Definition

CI-v4 MRc3: Building product disclosure and optimization - environmental product declarations
posted by Bonny Gray on Aug 13, 2018, 12:06 pm

Building product disclosure and optimization - environmental product declarations

Option 1. environmental products, 
Use at least 20 different permanently installed products sourced...

Last reply: Landis Wilson, Feb 21, 2020, 7:07 pm

v4, IDC, LEED Interpretation ID# 10419, 2013 Title 24 Part 6 California Energy Code- Existing envelope?

CI-v4 EAp2: Minimum Energy Performance
posted by Kevin Gilleran on Aug 21, 2018, 6:35 pm

Hi,

Option 1 energy simulation - I am in review of the...

Last reply: Kevin Gilleran, Aug 22, 2018, 1:29 pm

Energy Model Scope for CI Project with independent HVAC system

CI-v4 EAc2: Optimize Energy Performance
posted by Marie Garcia on Oct 9, 2018, 5:07 am

hi Marcus / hi everyone,

We have a LEED CI project that is part of a 4 storey commercial building. Only portion of the Ground Floor will be part of the LEED CI project. Each tenant space...

Last reply: Marie Garcia, Oct 10, 2018, 11:37 pm

Option 5- 50% recyclable content by cost

CI-v4 MRc2: Interiors life-cycle impact reduction
posted by Anna McGee on Dec 4, 2018, 5:10 pm

How does one prove that "... at least 50% of nonstructural materials, by cost, are reusable or recyclable, as defined by the Federal Trade Commission Guide for Use of Environmental Marketing...

Last reply: Aleksandra Prawda, Dec 11, 2020, 8:13 am

Solar Panels

CI-v4 EAc1: Enhanced Commissioning
posted by Alexis Voeltner on Apr 8, 2019, 5:05 pm

Do solar panels that are being installed by the building owner need to be commissioned before the LEED submittal or can the...

Last reply: Ronnel Flores, Jul 15, 2020, 11:37 pm

Meeting Option 2 Requirements

CI-v4 EAc3: Advanced Energy Metering
posted by Bonny Gray on May 11, 2019, 5:28 pm

Below are the construction review comments from our reviewer:

Option 2:  Advanced Metering

  1. It is unclear if the Table:  Advanced Meters includes all individual energy end-uses...

Last reply: Marcus Sheffer, Feb 24, 2020, 10:52 am

U.S. Department of Energy’s (CBECS) database- data on the website

CI-v4 EAc6: Green power and carbon offsets
posted by Karen Elliott on May 13, 2019, 4:51 am

Dear All

We used prescriptive option on Minimum Energy Performance, so looking to calculate out energy use via U.S. Department of Energy’s Commercial Buildings Energy Consumption Survey (...

Last reply: Marcus Sheffer, Aug 11, 2020, 8:48 am

Are Shades 'Furniture and Furnishings'?

CI-v4 EQc2: Low-emitting materials
posted by Julie Hendricks on May 31, 2019, 12:53 pm

Motorized  and manual shades (such as Mechoshade) are in Division 12.  Do they count as "stand-alone furniture items" that must be included in low-emitting materials calculations?

Last reply: Allen Cornett, Aug 19, 2019, 11:58 am