Good afternoon, I am working on credit EAc3.1 for an...

Is it necessary to have exterior lighting monitor and control to achieve this credit point. if interior is on BMS, Will i able to take that credit.

Our project is an office tower with 30 tenants. Does the BAS need to control tenant's systems? HVAC is centralized (cooling tower and chillers), but each tenant controls fan& coils within the...

Our project received the following review comment:
"If any building spaces do not have automatic lighting control, provide information on the use and square footage of these spaces.
...

Is it necessary to calibrate sensors during the performance period even if the manufacturer’s recommended interval didn't pass yet? Or can it only be mentioned in the maintenence plan that the...

If our project's BAS controls 100% of the building's heating and air conditioning, but only 35% of the building's ventilation (by square footage), can we still pursue this credit? (Lighting is...

Motion sensors seem to be a natural, low-cost localized lighting control for this credit except for this one line: "Demonstrate that the BAS is being used to inform decisions regarding changes in...

I was wondering if there is a minimum set of comfort parameters which HAVE TO be measured by the BAS.

I am particularly interested in knowing if the Building Automation System HAS to...

Thanks to David Hubka, LEEDuser has added two sample documents to our Toolkit for this credit—a BAS summary report, and a preventive maintenance checklist. These documents were used sucessfully...

Does anyone have experience complying with this requirement? The reference guide does not offer many details on how this aught to be achieved. Can it be done in-house? Would most mechanical/TAB...