See all forum discussions about EBOM-2009 EAc3.1
 Subscribe to new posts about EBOM-2009 EAc3.1 Post a new question aboutEBOM-2009 EAc3.1
See LEEDuser’s guidance on EBOM-2009 EAc3.1»
FAQs about EAc3.1 :

My project has a BAS for the main building HVAC and lighting, but then a separate BAS for an attached arena’s HVAC and lighting. Would this meet the credit requirements?

The lighting in our project isn’t tied to the BAS. Is there an alternative way to meet the credit requirements?

Can sensor calibration be performed in-house? Would a contracto or vendor be capable of performing this service?

Our project building has lighting in the stairwells that is kept on 24/7 for safety and code considerations. All other lighting in the building is on occupancy sensors. Will this situation prohibit the project from being able to pursue this credit?

View answers »

Forum discussion

EBOM-2009 EAc3.1:Performance Measurement—Building Automation System

Humidity

I was wondering if there is a minimum set of comfort parameters which HAVE TO be measured by the BAS. I am particularly interested in knowing if the Building Automation System HAS to measure interior air humidity. What about exterior air temperature and building pressure?

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Profile picture for user Dave.Hubka_2
Dave Hubka
Practice Leader - Sustainability
EUA
LEEDuser Expert
510 thumbs up

Fri, 03/07/2014 - 14:39

From my experience the reviewer will not require project teams to measure a minimum number of comfort parameters (e.g. humidity), or exterior temperature, building pressure, etc. However the BAS must monitor and control HVAC and lighting systems and be used to inform operating decisions.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.