It seems there are VERY few Innovation and/or Pilot LEED v4 ND options available. Is this a technical limitation of the online reference guide website or are there really something like eight Pilot credit options and zero established innovation options within the LEED v4 ND Innovation Catalog? Can teams use innovation credits within the v4 BD+C innovation catalog?  INc1 United States ...

van der Sluys LEEDuser Basic Member 1 thumbs up June 30, 2023- 4:29 am Waht if you project has no shower? Can you enter a line with a shower and then show that the design flow rate is 0 liter per...

Architects LEEDuser Basic Member 32 thumbs up October 5, 2021- 8:38 am Emily- What type of windows were included in your project?  I have a commerical project that has a lot of curtain wall and foil-faced...

to reduce its parking below that minimum. It does sound a bit stretch-y but it's very much in line with the intent of the credit. There are a lot of posts in this forum asking what to do if the ITE...

Hi Team, We have received an inquiry from a large corporation with more than 20 buildings on the same campus that has 2.5 MW of solar on its roof and operates with net metering (supplying the Solar PV electricity generation to the grid and using the grid power for the entire campus). Now They plan for LEED EB O&M and LEED zero carbon and energy for one of the buildings on the same campus,...

23, 2023- 4:20 am Thank you Marcus, You helped me a lot!!!! Log in or register to post comments ...

It appears as if you are applying the correct process in the model. I would provide the additional lighting energy use as a separate line item in the modeling results so that you can demonstrate...

units. Based on the mechanical schedules provided in PI Project Information, the terminal units are shut-off VAV boxes (non-fan-powered); therefore, the Er value should be zero or left blank. So I guess Er is zero for non-fan powered boxes. But do not understand the logic. EQp1 ...

if you could share your experience with me. Thanks a lot! Bests, Hashir Log in or register to post comments Zeynep Cakir LEED AP BD+C, WELL AP, Sustainable Building Consultant ECOBUILD LEEDuser Basic...

2023- 3:49 am I get this question a lot in my projects, what set-point to use? We have 100 % outdoor air, and flow rates according to our code is often a lot higher than ASHRAE. Can we use minimum flow...