| Topic | Recent |
|---|---|
Automatic Receptacle ControlNC-v4 EAp2: Minimum Energy Performanceposted by Jan Hesse on Aug 7, 2015, 6:36 am
ASHRAE 90.1-2010 8.4.2 states, that 50% of all 125 volt 15- and 20-Ampere receptacle outlets in private offcies, open offices and computer classrooms shall be automatically switched off when the... Last reply: Jean Marais, Jan 7, 2020, 1:54 am |
|
Major Renovation or EBOM?LEED Rating System Selectionposted by Christine Recke on Jun 24, 2019, 5:16 am
We intend to certify an existing office building which is going to be renovated with the following criteria:
Last reply: David Posada, Nov 27, 2019, 4:26 pm |
|
Infra-red electronic basin mixerCS-v4 WEp2: Indoor water use reductionposted by Hatice G. on Oct 28, 2019, 7:59 am
Dear all, in our office project we will use public lavatory restroom faucets that has infrared sensors which detects hand movement. So water only runs when it’s needed. In this... Last reply: emily reese moody, Nov 6, 2019, 10:57 am |
|
Green roof- no irrigation system but manual watering during hot summer months- relevant?NC-v4 WEp1: Outdoor water use reductionposted by Benjamin Weise on Feb 27, 2019, 2:12 am
Hello, the project I'm working on is a zero lot project with green roofs. There will be no irrigation systems in place but during hot summer months, the green roofs will need to be watered... Last reply: Benjamin Weise, Nov 4, 2019, 3:05 am |
|
EAp2-Energy Modeling_ Natural Ventilation/cooling Equivalent in Baseline models?Mid-Rise-v4 EAp1: Minimum Energy Performanceposted by Claudio Leon on Oct 10, 2019, 4:02 am
Dear all, As many of you may know, up until now ROS such as office rooms (Office), Bedrooms(Residental), etc. are not required to be mechanically cooled and sometimes not even ventilated... |
|
Calculating daily average and peak total occupantsCalculating FTEsposted by Nicole Isk on Oct 4, 2019, 11:24 am
Hi, i have a question regarding the calculation of the daily average and peak total occupants, because we received a review commnt on this topic. I have no idea how to calculate it and i... Last reply: David Posada, Oct 4, 2019, 10:13 pm |
|
Completed scope of Cx cycle prior to date of applicationEBOM-v4 EAc3: Ongoing commissioningposted by Christian Bösselmann on Sep 11, 2019, 10:46 am
Hi We´d like to prove implementation of the EAc2.3 in an Office Tower according to LEED O+M v4. While... Last reply: Christian Bösselmann, Sep 16, 2019, 2:43 am |
|
Increase of cost by percentage when applying LEM creditsNC-2009 IEQc4.1: Low-emitting materials - adhesives and sealantsposted by Claudio Leon on Aug 5, 2019, 12:02 pm
Hi all, what would you estimate as a cost increase (percentage wise) in a project budget when applying all four LOW EMIITING MATERIAL credits for a multifamily midrise residential project... |
|
Pilot Credit 82: Local Food Production as Innovation CreditEBOM-v4 INc1: Innovationposted by Nicole Isk on May 28, 2019, 4:27 amTrista Little Senior Consultant WSP USA LEEDuser Expert 369 thumbs up July 15, 2019- 6:50 pm Hi Kay, there's a new Pilot Credit section of LEEDuser that you can navigate to using the credit selector. PC82 is here: https://leeduser.buildinggreen.com/credit/Pilot-Credits/SSpc82#tab-bev. There's overview information, the specific credit requirements by rating system, and a discussion forum. If you have questions after reviewing that info, you may want to contact LEED Coach to run your strategy by them for input. For your second question, here's the list of WELL features that can be used... Last reply: Trista Little, Jul 15, 2019, 6:50 pm |
|
Regional material purchaseNC-2009 MRc5: Regional Materialsposted by Nikita Jayswal on Jul 5, 2019, 9:40 am
Hello, We have a Project in Germany where the contractor wants to know if the material which if purchased from a local distributor would count towards the credit or would we have to go... Last reply: Richard Metts, Jul 10, 2019, 10:07 am |
