See all forum discussions about NC-v4 WEp2

Subscribe to new posts about NC-v4 WEp2 Post a new question aboutNC-v4 WEp2

FAQs about WEp2 :

How does the CEE Tier 3A criteria for commercial clothes washers compare to ENERGY STAR certified washers?

Is the WaterSense label really required, even if a non-labeled fixture has a comparable flush or flow rate?

Not all fixture types can get the WaterSense label. Which fixtures do we need to ensure have the WaterSense label for our project?

View answers »

Forum discussion

NC-v4 WEp2:Indoor water use reduction

No shower

Ricardo Sá

Director of Sustainability

Edifícios Saudáveis Consultores (503 910 767)

LEEDuser Basic Member

79 thumbs up

October 3, 2018

Hi,

when a building does not include shower facilities (neither its occupants are expected to use any adjacent facility), how shall showers usage be treated in proposed building? Considering a virtual shower with performance as baseline?

Regards,

Post a reply

Dave Hubka

Practice Leader - Sustainability

EUA

LEEDuser Expert

510 thumbs up

Wed, 10/03/2018 - 17:58

if occupants do not have access to showers simply do not list them within the Indoor Water Use Reduction Calculator.

Ricardo Sá

Director of Sustainability

Edifícios Saudáveis Consultores (503 910 767)

LEEDuser Basic Member

79 thumbs up

Thu, 10/04/2018 - 08:18

Hi David, thanks for your feedback. In a different project we do not have showers installed in the building we are certifying but they are accessible to building occupants in an adjacent building. Due to this we have considered them in LTc6 (related with bicycle facilities). Since these showers are out of the scope of LEED certification, we shall keep them out of Indoor water use reduction and water metering credits, correct? Regards,

Dave Hubka

Practice Leader - Sustainability

EUA

LEEDuser Expert

510 thumbs up

Fri, 10/05/2018 - 12:25

If occupants have access to showers (even if located outside the LEED project boundary) you must include them in the water calcs when attempting points under the Water Use Reduction credit. The water metering credit can still be achieved without metering the showers, I'd recommend reading the LEED reference guide to evaluate the project's best options for achieving this credit.

Stephen van der Sluys

LEEDuser Basic Member

1 thumbs up

Fri, 06/30/2023 - 08:29

Waht if you project has no shower? Can you enter a line with a shower and then show that the design flow rate is 0 liter per minute. This shows that water is being saved by not having a shower. The points for the bicycle facilities are naturally not obtained, but can one get rewarded for saving water a result??

Dave Hubka

Practice Leader - Sustainability

EUA

LEEDuser Expert

510 thumbs up

Fri, 06/30/2023 - 14:11

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.

You are currently logged in under an enterprise account

FAQs about WEp2 :

No shower

You rely on LEEDuser. Can we rely on you?

Add new comment