This is LEED reviewer question

The credit form indicates that the project is located in an area where the national standard or guideline for Particulate Matter smaller...

In one of our Projects with residential spaces, we are required to provided CO sensors for every residential unit. This is a mandatory requirement under the pre-requisite. The same was confirmed...

We are certifing a project with two buildings, the first is an offices, the second is a warehouses to rent in Spain.
The question is for the warehouse, this warehouse is not conditioned...

Our project are factory, the ventilation system use exhaust fans combined with louvre / open door to tranfer outside air direct from outside. 
To monitor, we consider that is natural...

We are working on an office building 17 meters wide, on one floor, the layout is a 3.5-meter distribution corridor, serving as a division between two rows of offices. These offices are equipped...

ASHRAE 62.1, Section A1.2.2 states:

Er is less than 1.0 for plenum return systems with secondary recirculation (e.g. fan-powered...

Hello,

the credit language requires: "An alarm must indicate when the outdoor airflow value varies by 15% or more from the outdoor airflow setpoint." In the course of a coordination with...

Hello,

We are working on a historic office building project for LEED New Const. & Major Renovation, and we have restrooms on each floor which are used slowly...

We are working on a YMCA with multiple single zone packaged rooftop units.  The engineer has designed every unit with CO2...

Dear All,

Has anyone experience on whether having air speed sensors in both the supply and return ducting of a recirculating variable air speed...