| Topic | Recent |
|---|---|
At what point during the project phase can a building be registered?LEED Rating System Selectionposted by Christoph Keck on Nov 22, 2021, 5:51 am
Hi guys, hope you have a nice Monday. Currently I am working on a project in Europe. The developer intended to achieve a BD+C certification but unfortunately the project... |
|
use density planning mapNC-v4 LTc4: Surrounding density and diverse usesposted by Alex Edwards on Nov 22, 2021, 6:00 am
Hi all! we have a building in a high... |
|
Location of the projectPilot-Credits EApc66: Community contaminant prevention - airborne releasesposted by Zuzanna Targosz on Nov 23, 2021, 8:27 am
Does it make any difference if a building is located in the area where level of NOx is permanently higher due to low stack emission caused by transport? |
|
Furniture: All materials are low emitting, but no furniture evaluationNC-v4 EQc2: Low-emitting materialsposted by Antti Karppinen on Nov 24, 2021, 2:33 am
Hi, Is it possible to comply with furniture evaluation, if a piece of furniture doesn't have the needed certfication, but all the materials (e.g. composite... |
|
Certification ProcessLEED Reviews: Appeals, Design/Construction Submittals, and moreposted by Luisa Scambia on Nov 26, 2021, 9:38 am
Hello LEEDUsers, Could you kindly confirm that my understanding of the LEED certification process/duration is correct:
|
|
Project Registration FeeLEED Rating System Selectionposted by Luisa Scambia on Nov 30, 2021, 10:34 am
Hello LEEDusers, I was just told by a... |
|
Refrigerant of cooling system of tenant’s Data Center in LEED CSCS-2009 EAc4: Enhanced Refrigerant Managementposted by F. Borja López Calle on Dec 1, 2021, 7:43 am
We are participating in LEED CS v2009 certification in an office building. This project consists of changing the HVAC system in the building. During the remodeling, this building... |
|
Is it acceptable to use low-emission printers without providing doors for copy rooms?CS-v4 EQc1: Enhanced indoor air quality strategiesposted by Elisa Somma on Dec 2, 2021, 10:53 am
It’s about Option 1, Mechanically ventilated spaces, B. interior cross-contamination prevention. Can I attempt the credit option 1 using low-emission printers, certified Blue Angel (as... |
|
Exhaust Ventilation make up airCI-v4 EQp1: Minimum indoor air quality performanceposted by Eric Dyer on Dec 2, 2021, 9:18 pm
Hello, we are dealing with the interior project of a beauty shop. Some of the space in the project is ventilated with an Energy Recovery Unit and an Exhaust Fan. ERU did not meet... |
|
Integrative Analysis of Building MaterialsPilot-Credits MRpc103: Integrative Analysis of Building Materialsposted by Chris Lombardo on Dec 3, 2021, 6:31 pm
This Innovation credit allowed our team to align efforts while pursuing the BPDO credit sections and select materials that fulfilled both credit requirements. Completing the calculator allowed... |
