Furniture: All materials are low emitting, but no furniture evaluation
NC-v4 EQc2: Low-emitting materials
posted by Antti Karppinen on Nov 24, 2021, 2:33 am
Is it possible to comply with furniture evaluation, if a piece of furniture doesn't have the needed certfication, but all the materials (e.g. composite...
v4.1 Timing of VOC testing
NC-v4.1 EQc4: Indoor air quality assessment
posted by Timo Rintala on Aug 26, 2020, 8:26 am
The v4.1 standard...
Last reply: Dionisio Franca, Dec 7, 2020, 6:35 pm
Under building Parking roof area calculations
CS-v4 SSc5: Heat Island Reduction
posted by Timo Rintala on Jan 28, 2020, 3:24 am
We have had recent guide from USGBC, that also in case of under building parking roof...
Last reply: emily reese moody, Mar 3, 2020, 4:57 pm
Electric vehicle charging station used in demand response strategy
NC-v4 EAc4: Demand response
posted by Martina Salonen on Aug 24, 2018, 9:14 am
vehicle is getting quite common for the demand response programs here, but since I found no mention of this anywhere in the LEED manual nor forum, I wanted to confirm that it is acceptable strategy...
Last reply: Martina Salonen, Sep 6, 2018, 5:45 am
Experiences about ACP Pilot Credit – No Cooling Tower (WEpc94)?
Pilot-Credits WEpc17: Cooling tower water use
posted by Christina Nybergh on Oct 5, 2016, 7:22 am
Last reply: David Eldridge, Jul 11, 2018, 4:38 pm
Prerinse spray valves in Europe
NC-v4 WEp2: Indoor water use reduction
posted by Antti Karppinen on Mar 27, 2018, 9:26 am
LEED V4 prerequisite for prerinse spray valves is 1,3 gpm (4,9 liters per minute) but I haven't found any products with such low flow rate sold in Finland. Some manufacturers have...
Last reply: Jens Apel, Apr 9, 2018, 2:24 am
No cooling tower- District cooling
NC-v4 WEc3: Cooling tower water use
posted by Martina Salonen on Aug 23, 2017, 8:16 am
Hello! We have project which would be applicable for the 'no cooling tower' alternative compliance credit. However, the client is now considering connection to the district cooling system. Do I...
Last reply: Martina Salonen, Oct 31, 2017, 4:56 am
A shared storm water tank with other projects
CS-2009 SSc6.1: Stormwater design - quantity control
posted by Francesco Allaix on Aug 12, 2016, 9:43 am
I have a LEED project where they plan a storm water tank that will be a shared one with two other buildings next to the LEED project building. How can the share of our LEED project building's...
Last reply: Tristan Roberts, Jan 19, 2017, 12:52 pm