Thermal comfort and energy saving seem to be closely related.

For a store project, energy saving is required more than thermal comfort of space.

Actually in Korea, we regulate...

Hello.

There is a question as a preliminary contractor for bird collision deterrence.

If I had a way to lower a threat factor to 15 or less as an alternative to bird collision,...

Hello! I would like to ask about the 1/4 mile radius from building boundary. I have already read the article on FAQ and the one which Emily wrote, but I have a small confusion on it.

When...

Hi every one, Marcus

I am doing data center energy modeling for LEED V4.

The data center is composed of 3 type spaces.

Usage : dedicated data center

...

My project is located in South Korea, so I open fall into difficulties to interpret manufacture data. 

About Spray adhesives, material has voc g/l  limit and Greenguard certificate. 

My project located in South Korea. So I often fall into difficulties to interpretation manufacture data.

The material is "Scotch-WeldTM Hi-Strength Postforming 94 CA".

As per the...

Dionisio Franca Senior Consultant Woonerf Inc. LEEDuser Premium Member 19 thumbs up February 13, 2018- 2:20 am Hi Jeong, The LEED Online did not ask for demand-response participation, only for a charger that is addressable. Please read this thread too:  https://leeduser.buildinggreen.com/forum/grid-interactive-charging-stations I hope this helps. Log in or register to post comments ...

Hi all,

Is there any alternative when our team cannot implement 25 feet smoking prohibition policy due to a restricted project area?

Hello, I have a question about the EB certification process since it is my first job having work on O+M project. I would be very thankful if I would be able to get any answer on it here.

...

Is there a different Table 1: ASHRAE 90.1-2013 Appendix G percentage Improvement that we can use for those projects under LEED v4 but using ASHRAE 90.1-2013?

If so, please forward.

...