I'm looking forward to having this system in place and welcome that the USGBC and GBCI have considered that this process is necessary.

I just re-read Nadja Turek's earlier comment (from Aug 29, 2012) which included this excerpt from a CIR response: "The metabolic rate for occupants involved in highly physically activity fall outsi

We will be salvaging furniture from a school already on our site, but we are not going for MR3 (Mat. Reuse) due to the limited amount.

I have completed the SSc7.2 form...successfully it appears and upload the required documentation. Is there additional documentation for the RP credit? We really need the RP point.

We have a multiple building Project and the LEED Project Boundary of the 4 buildings to be certified do not sum up to be equal do the LEED Campus Boundary, which is according with AGMBC 2010 page 9

Dear all, I'm establishing a baseline model for an office building in ASHRAE climate zone 6. The HVAC system of the proposed building only has heating radiators using municipal supplies for winter

Hi Everyone, I have seen two answers so far, so I will ask again, sorry. Are interiors blinds a valid option under LEED 2009 NC to reduce the glaring issues when running a daylight simulation wit

I have two specific questions: 1. Just to confirm, is it necessary that the 2 projects of experience for the CxA are LEED certified (or persuing LEED)? 2.

What would be the recommended time/phase during a New Construction project when one should submit the preliminary design review?

The credit form for SSc6.2 has apparently changed. The table 1 for TSS has been removed, and in its place a description of BMPs is required. Is this the case?