The actual points won't be achievable for a few months, but USGBC has released implmentation guidance. Please see the details here:
...

We have a school project registered under LEED for Schools 2009. The project involves the demolition and asbestos abatement of the existing school building then the construction of a new school...

For Core&Shell projects, the reference guide specifies : “Assume that the entire floor plate, except for the core, will be regularly occupied space “.
However, for high-rise office...

Hello, I have a project with three pieces of process water equipment and I have a few questions about the form.

1. Does the "cycles/ day" column represent an estimated cycles per day this...

Can you please provide a sample for this, what is required for "The three dimensional orientation of the luminaire (plan/ elevation)"? Does this mean I need to provide the site lighting layout in...

Hi,

Our project is following the Tenant Neutral option for WEp1c3 because even though the developer is providing all plumbing fixtures, preparations are available in case the upper floors...

Minimum duct seal level must comply with table 6.4.4.2A- Ashrae 90, i have this in my specification for duct and i think it apply only to G.I Duct, Not to pre insulated duct, please anyone can...

Since B stage is compulsory to be included I would like to ask similarly how deep should we dig in. Having in mind the following:
B1-B3 – Bearing in mind all MEP is out of the assessment....

The credit says cradle to grave so it is obvious that this part has to be included. Is there any guidance how should it be included? Having in mind two methods:

The most simple method:...

Hello - has anyone had an issue with Requirement #9: where should the 50' tree spacing start from a busy intersection? We have an urban building with 3 facades, and the required vehicular line...