Topic | Recent |
---|---|
Automatic daylight responsive controls for sidelighting AHSRAE 90.1NC-v4 EAp2: Minimum Energy Performanceposted by Tien Duong on Jul 29, 2020, 5:32 am
Hi All, In term of mandatory of ASHRAE 90.1, The lighting in the sidelighting must use photocontrols to change the general lighting level in the primary sidelighted area to reduce the... Last reply: Tien Duong, Jul 29, 2020, 6:54 pm |
|
Energy Model guideline for laboratory building- LEED v4 BD+CNC-v4 EAp2: Minimum Energy Performanceposted by Amal Venugopal on Jul 29, 2020, 6:53 am
Hi All, Is there any ASHRAE 90.1.2010 Appendix G Energy Model guideline for laboratory building? Thanks.. Last reply: Marcus Sheffer, Jul 29, 2020, 9:36 am |
|
How to achieve minimum savings in energy consumption in a naturally ventilated project with high miscellaneous loads?NC-v4 EAp2: Minimum Energy Performanceposted by Jose Antonio Kovacevic on Jul 27, 2020, 4:31 pm
We are currently working on a naturally ventilated project located in Lima, Peru and we are having problems achieving the minimum 5% saving in energy consumption for the energy prerequisite. The... Last reply: Marcus Sheffer, Jul 28, 2020, 1:05 pm |
|
USGBC Alternative Energy Code ChecklistNC-v4 EAp2: Minimum Energy Performanceposted by Judhajit Chakraborty on Jul 21, 2020, 12:50 pm
Hello, I have a question regarding an elusive USGBC document regarding a "mandatory checklist for USGBC approved alternative energy code" and is mentioned in some of its articles regarding... Last reply: Judhajit Chakraborty, Jul 22, 2020, 1:30 pm |
|
DES Proposed Case Default EfficienciesNC-v4 EAp2: Minimum Energy Performanceposted by Ricardo Sá on Jul 10, 2020, 10:10 am
Dear All, Last reply: Marcus Sheffer, Jul 10, 2020, 12:57 pm |
|
NC / CS MixNC-v4 EAp2: Minimum Energy Performanceposted by Maria Grimm on Jul 9, 2020, 6:43 pm
Question regarding a project that is registered as NC. The project is a approximately 70% residential (NC) and 30% core & shell office. When calculating the energy credit - is there a way we... Last reply: Marcus Sheffer, Jul 10, 2020, 12:54 pm |
|
90.1 2010 User's Manual versus the StandardNC-v4 EAp2: Minimum Energy Performanceposted by Dave Hubka on Jul 1, 2020, 8:24 am
I assume the Standard must be followed when the User’s Manual contradicts it. 90.1 – 2010, Standard 9.4.1.3 (b) “….reduce lighting power of each luminaire by a... Last reply: Dave Hubka, Jul 2, 2020, 10:04 am |
|
ASHRAE Baseline Heating Fuel Type with Gas Process LoadsNC-v4 EAp2: Minimum Energy Performanceposted by Neil Bulger on Jun 16, 2020, 6:13 pm
I have a new office building where all space heating is designed to be electric heat pumps with supplemental electric resistance, including the outdoor air makup units using heat pumps. The... Last reply: Marcus Sheffer, Jul 2, 2020, 9:35 am |
|
Energy Modeling for Addition to Existing LEED NC-2009NC-v4 EAp2: Minimum Energy Performanceposted by Joe Cavanaugh on Jun 24, 2020, 9:08 am
Our proposed project is to add about 30,000 square feet to an existing 55,000 square foot University science building. The existing building is LEED Gold under NC-2009. We hope to pursue LEED-... Last reply: Marcus Sheffer, Jun 26, 2020, 9:17 am |
|
Energy Star Target Finder Outside US?NC-v4 EAp2: Minimum Energy Performanceposted by Francesco Passerini on Jun 15, 2020, 12:40 pm
Marcus wrote this in the forum relative to CI-v4 EAp2: "Projects outside the US are not required to produce a Target Finder score". Is that valid for BD+C as well? If it isn't, I... Last reply: Marcus Sheffer, Jun 15, 2020, 3:17 pm |