Hi all

In my project, solar photovoltaic panels are used to preheat domestic hot water, which is then heated by gas-fired boiler to the set temperature.However, solar photovoltaic panels...

Dear all,

Is it possible to correlate vertical fins with projection factors shown in table 5.5.4.4.1 ASHRAE 90.1-2010?

FK 

Hi

Our situation is the following: the outdoor ventilation rates in the proposed building are higher than required by ASHRAE 62.1. Therefore, the baseline model will have lower outdoor...

Dear Everyone

I am quite confused because I got a review comment recently where Reviewer suggests to exclude preheat coils from Baseline System 7. 

It is a project located in Poland...

Hi

I have a query regarding the ASHRAE Office Schedule. During normal occupancy hours the schedule is set to 95% occupancy, however our experience tells us that an 80% occupancy is typical...

Hi,

I am working on an energy model for core and shell office building. To reduce the reheat energy the mechanical designer planning to reduce the minimum stop for fan-powered boxes. If we...

We are currently working on a LEED Core and Shell v4 office building on Santiago, Chile. Regarding the issue of mandatory provisions ASHRAE 90.1-2010, if there is a binding lease or sale...

Hello Dear
I am working in an office project  and another Warehouse Core&Shell rating system. At this moment, we are complying with mandatories of ASHRAE 90.1 only in the parts of Core...

Hi, 

I'm modeling a 12-floor hotel building located in Dubai that uses System 8:...

I'm working on an office project located at the top of a 3-level podium and has a 4-level basement parking. The parking slots are not solely for the office tower (office towers are the ones that...