Hello,
Our project is based on the case 2. Existing Site With imperviousness is greater than 50%.

We implemented several strategies for improvement:
a) Reduced runoff place...

We have received the review report of the building. Related to PIf2, there’s a technical advice:
“The form indicates that the project site is previously developed, but based on aerial...

Even though there is a post over this ítem I am not really sure about this two áreas and the need of signage.

In our builiding there are 4 entrances to the underground car park. In the...

Hello. We will make the Eap2 by Energy Star. To do this we have invoices for the total consumption of the building (offices + CPD), and manual readings consumption of different meters. Is this...

For justifiying compliance with LEED credits for a Project in Spain, can supporting documentation, management plans, etc. be in Spanish (which they need to be so they can be correctly understood...

To simulate the exterior lighting in Baseline Building, i have to model it according table 9.4.5 of Standard 90.1?

Or it is not possible to earn points for exterior lighting systems?

A developer certifies a 10 story residential building using the LEED Core and Shell rating system. He then sells the residential appartments to individual buyers, the building will no longer one...

hello Marcus,

i am currently designing a navy lodge and it is 66,420 sq ft.its a Four floor building with 12 guestrooms on each floor about 900 sq. ft each.

we have solar panels...

We have one unique boiler, that feeds two buildings inside the LEED boundary of the hotel.

Must we do two energy models, with two set of input/output reports? Or can we do a unique energy...

We are developing a building energy modeling of a residential building based on 90.1-2007.

The dwelling units have exterior areas (balconies) that have luminaires.

These luminaires...