to post comments Sara BENLOUBA Green building manager Confidential LEEDuser Basic Member 12 thumbs up November 27, 2023- 9:49 am Dear Glenn,  Thanks a lot for your answer.  Log in or register to post...

for workers only from the parking lot and the ground floor are building entrances that should comply. The terrace doors are not building entrances. The definition- "building entrance: any doorway, set...

Basic Member 12 thumbs up November 27, 2023- 9:03 am Dear glenn Heinmiller,  Thanks a lot. Your opinion is very clear.  Suppliers say it hard to find luminaires with CRI>90 that can be integrated...

costs is probably the most effective way to induce energy control behaviors)? Or do you think we will need to install an additional meter (in the same power line of the supplier meter) and connect...

We have a mixed project with residential and office units. Residential area has apartments and few (12) duplex units. As per LEED requirement for Prerequisite 1- Minimum IA performance, CO sensors have to be provided for all residential units even if the cooking or any associated combusion are electric based. As the project has 12 duplexes do we need to provide 12 CO sensor units or more. As per the credit language, " CO monitors must be installed on each floor of each unit ", does that make 12X2 CO sensors for the 12 duplexes?  As the duplexes will have kitchens in the zero floor while...

Member 84 thumbs up July 17, 2012- 1:13 pm Dear Susan, first of all let me thank you for your answer. I agree with every single line that you wrote and I can confirm that in the preliminary review...

a fixture should be counted and there are a lot of conversations on how to account for various different populations in the other WE forums so I won't repeat that conversation. The foot baths I would...

demonstrate that the building is intended to have zero weekend occupancy (including custodial / maintenance / security staff). To review an exception, the project team would need to provide a narrative...

well, thanks a lot for your immediate response Marcus! Log in or register to post comments Marcus Sheffer LEED Fellow 7group / Energy Opportunities LEEDuser Expert 5867 thumbs up February 15, 2012- 9:59...

I am doing some research on LEED v4.1 O+M and I have a number of questions. I am going to post them here (I know it is a lot) hoping someone knows the answer for a few of them, maybe. thanks!! a)    How do we calculate the gross floor area without ARC? b)    How do we calculate  Weighted occupancy  ? could not find example calculation anywhere c)     How do we calculate  Weighted operating hours? could not find example calculation anywhere d)    How do we calculate  outside temperature adjustment factor? could not find example calculation anywhere e)    Where can I find the Table 2. Operating...