to ISO 11890 parts 1 and 2, instead of the CARB and SCAQMD regulatory standards. Two materials are prohibited and do not count toward total percentage compliance: hot-mopped asphalt for roofing, and coal...

Michelle Bombeck Associate Principal O'Brien360 LEEDuser Premium Member 34 thumbs up March 12, 2024- 11:43 am Hi Mary- As long as the EPDs were created following all the correct ISO standards, either is a fine approach and really depends on how the manufacturer produces the product and decides to formulate thier EPD strategy. However, as for which path is more "valuable"...

of the manufacture. ISO 21930 explicitly says you cannot compare cradle to gate EPD’s.  So responsible manufacturers supplying type III EPD cannot send Type III EPD’s to a knowledgeable third party to compare....

am Hi, I am just wondering has there been update as to whether BES 6001 is approved? Also would ISO 14001 meet the criteria for Option 1? Thank you. Log in or register to post comments Paula Melton...

Method v1.2 and is reported (TVOC ranges: 0.5 mg/m3 or less, between 0.5 and 5 mg/m3, or 5 mg/m3 or more). Laboratories that conduct the tests must be accredited under ISO/IEC 17025 for the test methods...

vibration, noise, and user fatigue, as reported in the user manual in accordance with ISO 5349-1 for arm vibrations, ISO 2631–1 for vibration to the whole body, and ISO 11201 for sound pressure at operator’s...

(2010), (2) the German AgBB Testing and Evaluation Scheme (2010), (3) ISO 16000-3: 2010, ISO 16000-6: 2011, ISO 16000-9: 2006, ISO 16000-11:2006 either in conjunction with AgBB, or with French legislation...

and is being used on this project. If applicable, provide an updated EPD." I am not reading that the project location is a factor in the EPD unless it is inherent in the ISO standards?  Has anyone else...

applied in mass per surface area (if applicable). Organizations that certify manufacturers’ claims must be accredited under ISO/IEC Guide 17065. " Lately I see more and more materials that have reports...

emily reese moody Sustainability Director, Certifications & Compliance Jacobs LEEDuser Expert 475 thumbs up June 10, 2020- 7:06 pm Samantha, look in the Step-by-Step Guidance section of this credit, under Opt 2 Air Testing: STEP 1. DETERMINE AIR-TESTING LOCATIONS Select testing locations with the least ventilation but the greatest concentration of VOCs and other contaminants. Testing must be completed by an appropriately accredited professional. Use current versions of ASTM or ISO methods. The number of testing locations depends on the size of the building and number of ventilation systems...