| Topic | Recent |
|---|---|
VOC requirements of Non Shrink Grount under Structural Steel column Base platesCI-2009 IEQc4.1: Low-emitting materials - adhesives and sealantsposted by Hari krishnan on Oct 11, 2018, 3:11 am
Hi In our project, we are using non-shrink grout under structural steel column base plates. This non shrink grout and base plate will be covered by floor screed and further floor finishes... Last reply: John-David Hutchison, LEED AP BD+C, PMP, Nov 26, 2018, 9:21 am |
|
Adhesive the applied to the pre-fabricated materialsCI-2009 IEQc4.1: Low-emitting materials - adhesives and sealantsposted by Panupant Phapant on Mar 10, 2015, 5:34 am
Hi Please advise whether the adhesive applied to the pre-fabricated materials that is furnished offsite must meet the... Last reply: Joyce Kelly, Oct 23, 2017, 10:12 pm |
|
Form (V06) product data samplesCI-2009 IEQc4.1: Low-emitting materials - adhesives and sealantsposted by Zachary Tetreault on Feb 11, 2016, 12:03 pm
Does anyone know with the New Form (V06) do we no longer have to upload more than 20% of the product sheets? Last reply: Tristan Roberts, Aug 26, 2017, 6:32 pm |
|
Adhesive for acoustic insulation on ventilation instalationCI-2009 IEQc4.1: Low-emitting materials - adhesives and sealantsposted by Andrzej Gutowski on Jun 5, 2017, 11:21 am
Doea anyone could advise what category of adhesive would be that? Would that be up to material used for acoustic insulation? Last reply: John-David Hutchison, LEED AP BD+C, PMP, Jun 26, 2017, 5:25 pm |
|
Aersol AdhesivesCI-2009 IEQc4.1: Low-emitting materials - adhesives and sealantsposted by Alice Reeves on May 11, 2017, 4:42 pm
I have evidence that the aerosol adhesive I am using is below the % VOCs per weight limit provided in the LEED Reference Guide for Aerosol Adhesives. How do I record this information on the... |
|
Primer Sealer VOC ContentCI-2009 IEQc4.1: Low-emitting materials - adhesives and sealantsposted by Jordan Kirrane on Jul 14, 2016, 10:05 am
I have a water based primer sealer that the client is looking to use in order to fix artwork to the walls throughout their floors. The technical sheet for the primer dictates that the... Last reply: John-David Hutchison, LEED AP BD+C, PMP, Jan 18, 2017, 8:58 am |
|
decorative glass film applies to EQc41?CI-2009 IEQc4.1: Low-emitting materials - adhesives and sealantsposted by Diego Fernandez on Jul 7, 2016, 12:53 pm
Hello! My project is in Spain. We have to put on site a decorative film on the glass. Is this in the scope of LEED EQc41? I can´t find any manufacturer that includes it in the description. Last reply: Jon Clifford, Jul 10, 2016, 9:10 pm |
|
New to LEEDCI-2009 IEQc4.1: Low-emitting materials - adhesives and sealantsposted by Amy Moore on Jun 30, 2016, 9:35 am
I am trying to report materials for IEQ Credit 4.1 and am not sure which category my materials are supposed to be reported under. The materials are thin-set mortar, waterproofing (over or under... Last reply: John-David Hutchison, LEED AP BD+C, PMP, Jul 8, 2016, 11:39 am |
|
"integral to the water-proofing system"CI-2009 IEQc4.1: Low-emitting materials - adhesives and sealantsposted by Kathryn West on Jun 5, 2015, 11:46 am
Question about LEED Interpretations #100000699 and ID#100000700. Do these mean that the adhesive used to adhere a roofing membrane no longer falls under the scope of this credit? ... Last reply: John-David Hutchison, LEED AP BD+C, PMP, May 19, 2016, 11:29 am |
|
Vinyl electrical tapesCI-2009 IEQc4.1: Low-emitting materials - adhesives and sealantsposted by Carla Lopez on Nov 20, 2014, 6:32 pm
Vinyl electrical tapes (such as Scotch® Super 33+™ Vinyl Electrical Tape) are included in this credit? Last reply: Jon Clifford, Nov 20, 2014, 6:41 pm |
