Forum discussion
CI-2009 IEQc4.1: Low-Emitting Materials—Adhesives and Sealants
Hi
Please advise whether the adhesive applied to the pre-fabricated materials that is furnished offsite must meet the VOC requirement. In case that the adhesive applied for this situation is required to meet the VOC requirement and we cannot find the suitable adhesive. Is it acceptable if we leave the pre-fabricated materials for offgassing for a certain period such as 7 days before the pre-fabricated materials is installed on site.
Thank you
LEEDuser is supported by our premium members, not by advertisers.
Go premium forTo post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
Do products applied to the weather barrier need to comply with VOC thresholds?
How do I determine what application my product falls under?
How is VOC % less water determined for aerosol adhesives?
Do grout and caulking need to be included, and if so, what is the application category?
Jon Clifford
LEED-AP BD+CGREENSQUARE
LEEDuser Expert
323 thumbs up
March 10, 2015 - 7:26 am
The texts of Credits IEQc4.1 & IEQc4.2 state that the credit requirements apply only to products “used on the interior of the building,” “inside of the weatherproofing system and APPLIED ON-SITE.” Therefore, the VOC restrictions do NOT apply to products applied during off-site pre-fabrication.
Joyce Kelly
Architect - Cx Provider - Green Building SpecialistGLHN Architects & Engineers
26 thumbs up
October 23, 2017 - 10:12 pm
I presume the adhesives, sealants, etc. must meet VOC limits when they are used within the building envelope of a modular lab building assembled nearly 500 miles away and then installed on a new foundation on its permanent site.