We are trying to go for LEED O+M  certification in one  of our buildings which has a Chiller plant in it along with other occupied places

Since we are measuring the building energy...

Dear everyone,

We are in the process of review, suddenly the client wants to add a smoking lounge in the Mixed used Development Project. So I'm checking all the requirements for compliance...

Hi,

Struggling to find options for alternative transportation for a planned LEED EBOM project in Qatar :S

Is shuttle service offered by the building owner to commute buildings...

does any one know what is the difference between the cycle racks provided for short term and long term storage (i don't mean percentage wise)?
I work on a stadium which 6 times in a year...

Hello,
Our project is a LEED NC v2009. Due to a heavy rain season, it happened that some leakage lead to a partial grow of mold in some ceiling areas which are made from gypsum boards. The...

The contractor on our project has established a weighing station for trucks and vehicles within the project boundary and is planning to use it to measure the amount of diverted waste for MRc2....

Hi all,
Modelling DCV has been discussed many times in this forum. I gone through and understand quite a bit. I am listing my understanding along with some quires. Any response is much...

Marilyn Specht Vice President & Managing Principal, US Sustainability Introba LEEDuser Expert 51 thumbs up May 3, 2017- 12:37 pm Hi Trina, Who told you to do that? My understanding is they do not require the changing room to be separate from the shower area. This is also discussed in the LEED CI-2009 SSc3.2 forum where it is confirmed you do not need separate rooms for the two. Log in or register to post comments ...

Hello,
We are submitting data about certain materials that has "zero"...

Our project consists of (5 townhouse + multipurpose room). This is considered as one building.

townhouses are 3-5 floors and each is served by 1...