The CO2 sensors for this science building are in the return ductwork, not 3-6' from the floor. I'm telling the team that...

In the LEED EBOM...

I have a project with 14 small rooms (

For a system with 100 % outside air, would it be possible to fulfill the credit intent by the utilization of heat triggered sensors? So instead of adjusting the intake air flow in densely...

We are currently doing a university building shared by two schools. Thus some of the areas of the bldg are to be develope in the future. Possibly some of these areas will be used as classrooms,...

Does the (airflow sensor) need to have any specifications other than the required accuracy (which is 15%) which was mentioned in the study guide?

The definition of densely occupied spaces is “spaces with a design occupant...

According to IEQc1, I am to complete table IEQc1-2 for all systems where 20% or more of the design supply airflow serves non-densely-occupied spaces. In my specific circumstance, I have 5...

Until now, I have only seen monitoring systems connected to a BMS that generates an alert to the Facility Manager.
One of my clients is however asking if this alert could be generated by a...

I found a thread from 2011 discussing the Addendas released 5/9/11 removing the footnote that was previously changed under Addenda reliease 9/19/10. Can someone set me straight if i'm not...