Hi! Can we use this Pilot-Credit in a LEED...

Greetings everybody

I'm modeling a datacenter at the moment and there few issues I'm wondering how to proceed.
The project consists of two building adhered to each other. The floor...

Greetings,

In the IEQp1 calculation form, provided by USGBC for using in LEED v4, in the Occupancy Category pull-down menu, there is nothing related to equipment rooms, non-occupied stores...

In the Reference Guide on page 254 in Table 1. it's written that "Purchases of of ongoing consumables during the performance period must represent at least 5% (by cost) of documented or...

Greetings everybody

I'm modeling a datacenter and there are few issues about which I'm wondering how to proceed.
The project consists of two building adhered to each other. The floor...

It would be benificial to all if you could post the USGBC response on this forum. Good Luck! Log in or register to post comments Melissa Merryweather Director Green Consult-Asia LEEDuser Basic Member 245...

Hello,
We have a project in Russia under LEED for CS-2009 sertification.
There are technical rooms with epoxy flooring.
1) Can anybody confirm if I am wrong or right? Epoxy...

“Hello, I am working on IEQc8.2 (views) for large logistic center. The hall dimensions are 230x60 metres. Question A) On the groundfloor, only the shorter side has windows which leads to the...

My project site is located next to one of the main arteries of Warsaw. Due to the high trafic the strip adjacent to the road is contaminated with petrol related substances (not much but still)....

Greetings,
There is an issue on applying F factor about which I'd appreciate some assistance.
The F factor in general refers to the floor slab edge insulation. Its value depends also...