Do adhesives used in the assembly of an exterior sliding door FRAME need to comply with the onsite VOC requirements?

What will be the effect on energy consumption if i model conditioned (warehouse) space as semi-heated space by using system type#9 or #10 in baseline. my dominant baseline system type is #5 (VAV)

My client has installed a large solar array on top of the parking garage. The output is 160kWh annually.

If the project is registered according to AGMBC 2010, (Block - Mastersite -Building 1 and Building 2,3 approach) Do we have to submit the following project information form for Mastersite as well

I am working on a residential building, with more than 20,000 SF of conditioned non residential spaces, so I am using System #7 for non residential spaces.

Can you tell me if I am looking at this correctly if I choose to treat the entire concrete assembly as one entity and do not separate out the SCMs?

What is the basis for the divisor chosen in the calculation for each of these particular modes of transportation?

Hi folks, We've been receiveing Material Safety Data Sheets informing VOC levels, recicled content percentage and distances for MRc5 with expiration date and this seems to be common practice by ma

Dear All, I have a question in modelling the lighting power density for high-rise residential development.

I have a project that is seeking certification under LEED for Commercial Interiors v2.0.