Log in
Forum
Topic

Industrial Normalization

EBOM-v4 EAp2: Minimum Energy Performance
posted by Muzammal Abbas LEED AP (BD+C) on Aug 5, 2016, 4:53 am

I am working on industrial project and below is the leed reviewer comments that is confusing for me how to deal with it and how to normalize to resole these issues ?

The end-use breakdown...

Last reply: Dave Hubka, Sep 24, 2023, 1:11 pm

Industrial Facility

Pilot-Credits WEpc115: Whole Project Water Use Reduction
posted by Jill Kurtz on Mar 18, 2021, 7:55 am

Anyone else attempt this credit as a large industrial facility? We did and even though our water saved is astronomically more (7000 times more) than in our flow flush, outdoor water use, we...

Last reply: Alison Rosso, Sep 22, 2023, 5:37 pm

WaterSense no longer applicable to sensor-equipped lavatory faucets?

NC-v4 WEp2: Indoor water use reduction
posted by Brian Salazar on May 17, 2023, 6:06 pm

Hi all - So, this one has snuck up on me.  Working on several commercial/office projects now; helping to specify restroom fixtures. It seems that the EPA WaterSense certification has changed to...

Last reply: Brian Salazar, Sep 22, 2023, 4:16 pm

When Did the v4 Water Metering Credit Change?

NC-v4 WEc4: Water metering
posted by Kyle G. Pearson on Sep 22, 2023, 12:42 pm

On our last two projects we've gotten a comment indicating that we need to remove the usage of "electric water coolers, janitors sinks, swimming pool, laundry, commercial kitchen, salon sink...

Baseline for Projects with Several Physically Distinct Structures

Hospitality-NC-v4 EAp2: Minimum Energy Performance
posted by Mike Mentzos on Sep 15, 2023, 4:36 pm

We are currently working on a project which has a total area of about 4,000m2. The project consist of several buildings, each of them is no more than 2,300 m...

Last reply: Marcus Sheffer, Sep 22, 2023, 11:29 am

Baseline Projects with Several Physically Distinct Structures

Hospitality-NC-v4 EAp2: Minimum Energy Performance
posted by MICHAIL MENTZOS on Sep 18, 2023, 3:37 am

We are currently working on a project which has a total area of about 4,000m2. The project consist of several buildings, each of them is no more than...

Last reply: Marcus Sheffer, Sep 22, 2023, 11:29 am

v4.1 July 2023 Guide- EAC Arbitrage

NC-v4.1 EAc5: Renewable energy
posted by Christina Hohman on Sep 19, 2023, 12:13 pm

The newest v4.1 Guide (July 2023) has added the following language - "Note that while the previous versions of LEED allowed for EAC arbitrage for on-site systems, LEED v4.1 requires the owner to...

Last reply: Marcus Sheffer, Sep 22, 2023, 11:28 am

Porch lighting included in building energy model?

NC-v4.1 EAc2: Optimize Energy Performance
posted by Rachel Novick on Sep 20, 2023, 5:18 pm

Our building has a large open-air porch that we use for parties. It has lights and ceiling fans. Is that electricity included in the building energy demand calculation that is used to determine...

Last reply: Marcus Sheffer, Sep 22, 2023, 11:22 am

On-site and off-site renewable energy

Data-Centers-NC-v4.1 EAc5: Renewable energy
posted by Patrick Ip on Sep 21, 2023, 2:11 am

A new data center will be constructed in a university campus. If the new building connects with the renewable energies generated within the campus but not within the building site boundary, can...

Last reply: Marcus Sheffer, Sep 22, 2023, 11:21 am

Sample transit documentation

CS-v4 LTc5: Access to quality transit
posted by Vanessa Rosado on Sep 22, 2023, 8:07 am

Hi

My question is about the example provided "The Frick Collection 1E 70th St, New York" for this credit, which is: there is a note saying that "No one transit mode comprises more than 60...