Hi everyone,

We are close to certify a Core and Shell project as Campus. We have the following doubt: is it necessary to have an specific area for storing and collecting recyclables for...

Hi, in our project we have reduced the complexity of the land areas, this has affected garbage have 2 rooms on the same level with easy vehicular access for trash removal.

Our question is...

Hi Ma'am/Sir,

Our project has three towers and shares one podium. There are three proposed recycling areas but too small to comply the leed requirement. But if the areas were sum up, it...

I am working on a C&S project and I am trying to figure out the expected volume of recycling for the building. I've contacted local waste haulers but is there somewhere else that i can find...

Hi all,
Our project is a commercial tower mainly with offices and few retail shops. The total area is 272,500 sq. ft. and we have provided waste collection area of 620 sq. ft. in the...

Project location: Outside Bogotá, Colombia
I am currently working on a CS project (a warehouse more specifically) located in a suburban region, near Bogotá-Colombia, called Tocancipá. The...

We are working on an office CS project which is being built to suit for a single tenant. The tenant will fit out the core and shell with a LEED-CI project that is being designed concurrently...

Reference calculation is based on 'sqft of the building' .
Does the sqft of the building will have to include the parking area also(example basement parking)

We are looking to install a 5000L Molok recycling bin for a LEED 2009 CS building that will be a restaurant. According to the reference guide a 11.6m recycling area would be required. However we...

I just received review comments back on MRp1 that I simply can't validate. I'd appreciate any help or advice that might be out there. Otherwise, I think I'm going to champion this one and push...