Our project is demolishing a wall partition which is going to be reused on a different project (not the one applying for LEED). In this case, can the first project claim points under LEED's...

We are doing a LEED CI V4 project. The client will use existing air duct, diffuser, grilles, provided by the landlord and AC chilled water pipe. Can this be counted towards Interior non...

I'm working on a TI project and we're trying to get the Design for Flexibility point. When calculating for this credit, do we use linear feet or square feet of the product? I'm guessing we...

Hi LEED experts, my interior Office wants to have an open ceiling, where people can see and access the piping, ductwork system, and HVAC machines hanging below the ceiling...

How does one prove that "... at least 50% of nonstructural materials, by cost, are reusable or recyclable, as defined by the Federal Trade Commission Guide for Use of Environmental Marketing...

I'm posing this question under this particular credit, but it's actually applicable to a number of credits in a number of the rating systems.  For this credit, the credit form includes the reused...

1. In our fit-out project in London the...

Our project is on the second floor of a 3 story building. To start the space has had finishes removed for hazardous abatement before construction demo. The calculation sheet says to take into...

I'm not entirely sure what the LEED online form/template means in regards to calculations for flexible lighting control system. The form says to "provide a lighting schedule and calculations...

Does anyone have any real idea what a Plug-and-play power or lighting control system is?  Our electricians consider our bus bar power distribution system to be plug-and-play but this almost seems...