Log in
Forum » NC-v4 EAc3
Loading...
Topic

Lighting

NC-v4 EAc3: Advanced Energy Metering
posted by Abhinay Sharma on Nov 20, 2019, 3:29 pm

Hi, my project is in design and current proposes to meter lighting and exterior lighting together.  The exterior lighting is very small so the electrical engineer is pushing on whether we really...

Using EMS to calculate some End-Use Energy

NC-v4 EAc3: Advanced Energy Metering
posted by Melissa Crowe on Oct 30, 2019, 6:47 pm

Hi All

We have metering set up for most of the end-uses that represent over 10% of total energy but for some equipment is it not cost effective or practical.

  1. Can we use...

Last reply: Melissa Crowe, Oct 31, 2019, 4:03 pm

Should meters by themselves hold data for 36 months?

NC-v4 EAc3: Advanced Energy Metering
posted by Edgar Arevalo on Oct 10, 2019, 2:50 pm

To be clear, even though the reference guide states "The system must be capable of storing all meter data for at least 36 months", does that mean the energy meters should have capability or does...

Last reply: Bipin Karki, Oct 11, 2019, 10:54 am

Extracting Energy Consumption from the BAS

NC-v4 EAc3: Advanced Energy Metering
posted by Claire Kapusta on Sep 6, 2019, 12:02 pm

Hello,

We are working on the design of a new office tower and we would appreciate some guidance on whether the following metering strategies are acceptable to qualify for the Advanced...

Data Storage Requirement

NC-v4 EAc3: Advanced Energy Metering
posted by Shannon Oletic on Jul 18, 2019, 2:04 pm

Hello,

Most digital metering systems with remote access capabilities have a cloud-based system were data can be stored indefinitely, or until the meter becomes inactive. Looking...

Last reply: Marcus Sheffer, Jul 19, 2019, 5:09 pm

EAc3- Clarification on the Advanced Energy Metering.

NC-v4 EAc3: Advanced Energy Metering
posted by Olawale Taiwo on Sep 5, 2018, 9:09 am

Hello All,

There seems to be some challenges with clarity on the wording of this credit instructions, our team Electrical Engineer and I had this conversation and it became necessary to...

Last reply: Marcus Sheffer, Feb 12, 2019, 6:51 pm

Advanced Energy Metering in Multi-Family Housing

NC-v4 EAc3: Advanced Energy Metering
posted by Allison Wilson on Feb 8, 2019, 3:16 pm

We're working on a dorm project with apartment style units such that it's essentially multi-family housing. Each apartment has a kitchen and is, according to my MEP, therefore being provided with...

Last reply: Marcus Sheffer, Feb 8, 2019, 3:43 pm

Advanced Energy Metering Whole Building Energy Sources

NC-v4 EAc3: Advanced Energy Metering
posted by susan eguia on Jan 10, 2019, 7:58 pm

Hi,

We have Fire Station project and submitted Advanced Meter Cutsheet for Electrical.

However, LEED Reviewer Team still required us to provide support documents which includes...

Last reply: Marcus Sheffer, Jan 14, 2019, 9:52 am

Process End Use- Manufacturing

NC-v4 EAc3: Advanced Energy Metering
posted by David Hubka on Sep 5, 2018, 4:46 pm

Hello,

We have a manufacturing project where 70%+ of the energy load is for the widget makers. None of the typical regulated end uses (e.g. space heating, interior lighting, domestic hot...

Last reply: David Hubka, Sep 7, 2018, 1:40 pm

Sharing Building-Level Energy Metering Data

NC-v4 EAc3: Advanced Energy Metering
posted by Francis Hernández on May 2, 2018, 5:58 pm

We have a LEED v4 project for the Corps of Engineers that is connected via the local installations BMS to a remote location for managing the buildings energy systems.  The meters and submeters...

Last reply: Marcus Sheffer, May 3, 2018, 12:20 pm