A New Construction Project in which the PV panels to be installed on a "330,000 SQM roof of an airport terminal building project"  to offset 22% of annual energy cost.

Is it possible to...

When finding the area of compliance for a single room under multiple view types, does the regularly occupied space that is entered for that space change?

For example, in my project, the...

Does anyone have any previous experience on the impact of water fountains and features on Outdoor Water Use reduction?  Should these be included or not?  There does not appear to be any specific...

We have a project where we can only use Flash Valves for WC instead of Reservoir. The valve is having a sensor and has a kind of automation for the dual flush option. The manufacturer...

I work in leed health care project in Kuwait and our contract state that our project have to be friendly leed ?
-What mean by friendly leed.
- what is the minimum requirement and the...

Hello,

I'm working on a project in Kuwait and need to achieve the IPc1 credit for water consumption.

I've been struggling to use the LEED-recommended ETo calculator tool, produced...

Hi,

Greeting! 

We are working to get 1 point under IEQ cr6 Option 2 - A (For all regularly occupied spaces, use light fixtures with a luminance of less than 2,500 cd/m2 between 45...

Hello, 

In our project we have almost all the roof covered with PV Panels. When we exclude the Skylights and PV Panels area,the remaining part is just 5%, mostly on the edges of the roof...

We are pursuing Credit IEQc4.1 in LEED NC v2009 for low emitting adhesives and...

We are doing a campus approach for our project. For pursuing SSc 5.2, Case 2 "Open space that is equal to the building footprint can be
considered separate from the project site, as long as...