Is it optional to upload all of the compliance forms if you initial the box and qualify for EAc1.3? What if EAc1.3 is not achieved but you have done the model and have some savings shown?...

I'm working on an existing Building. the original building has its gold certificate CS and all main...

We have a project that uses a seamless site-installed pulyurethane product for a gymnasium floor. (Pulastic or Elastiplus are two tradenames.) We are trying to establish whether they would be...

We are planning a commercial building with 2 floors of garage spaces under the building. These floors will be accessible via entryway for automobiles and two cores with elevators and staircases...

Hi,
what would be the most appropriate approach to model solatubes (as Skylight, using IES file provided by manufacturer, other)?
Thank you!

There is a rumor floating around about USGBC publishing a comprehensive LEED energy modeling guide (so that reviewers and users are reading from the same pages?). Has anyone else heard such - if...

The shower and changing rooms for our project will be outside the project boundary in a neighboring building. Is the 200 yard distance measured from entrance door to entrance door of each...

Would a high-rise tower be compliant with credits requirements? From the upper floors one would only see the sky outside...

My building is an academic building at a 100% residential boarding school. There are walking paths everywhere, students all live within 3/4-mile, and students rarely use bicycles. It seems...

The LEED Online sample form for water use reduction shows 21% reduction of water use in all fixtures. However, at the end of the form it indicates "N".
What is the reason for that?