We have a project that uses a seamless site-installed pulyurethane product for a gymnasium floor. (Pulastic or Elastiplus are two tradenames.) We are trying to establish whether they would be classified as a coating or as a resilient floor covering. Any thoughts?
You rely on LEEDuser. Can we rely on you?
LEEDuser is supported by our premium members, not by advertisers.
Go premium for
Lauren Sparandara
Sustainability ManagerGoogle
LEEDuser Expert
997 thumbs up
August 4, 2010 - 6:27 pm
Keith,
This is a good question. I think most people would call it a resilient flooring product. It seems like McGraw Hill would call it a resilient flooring product too: http://products.construction.com/Manufacturer/Robbins-Sports-Surfaces-NS...
That being said, it won't be eligible for FloorScore so you might want to try to see if it can comply with the Floor Coating requirement of 420 g/L and then submit with that approach.
Lauren
Elliot Dale
2 thumbs up
February 1, 2011 - 4:16 pm
According to addenda released July 19th, 2010, the VOC limit for Floor Coatings is now 100 g/L.
We are also using a resilient floor covering and are unclear as to why resilient flooring is not eligible for Floorscore. Could you please provide insight on this? Our product does comply with the Floor Coating requirement of 100 g/L. Do you have an update as to whether IEQc4.2 - Floor Coatings - is the appropriate way to classify a resilient flooring product?
Tristan Roberts
RepresentativeVermont House of Representatives
LEEDuser Expert
11477 thumbs up
February 1, 2011 - 4:31 pm
A resilient flooring product clearly falls under IEQc4.3. I wasn't aware that it can't be FloorScore-certified. Many of the certified products listd on SCS's site, for example, are resilient flooring.
Josh Jacobs
Technical Information & Public Affairs ManagerUL Environment
515 thumbs up
February 1, 2011 - 6:46 pm
Remember that the requirement for low-emitting flooring is also simply to show that the product meets the CA 01350 requirements. This does not require any third-party certification. Also, if the floor coating is put on to the floor prior to it being brought to the building site it is considered part of the product and needs to be proven low-emitting through the overall product testing methodology. If it is applied on-site, then it can comply with the VOC content requirements of EQc4.2 or be shown to be low-emitting through compliance with CA 01350 requirements.
Reinhard Oppl
Independent consultant on VOC issuesformerly with Eurofins Product Testing A/S
329 thumbs up
February 2, 2011 - 3:39 am
It looks like the term "resilient flooring" might be not 100% clear. In terms of LEED EQc4.3 this means solid flooring such as vinyl, linoleum, rubber, cork etc flooring. These may be supplied in rools or as tiles. All of these can be FloorScore certified if VOC emissions comply with CA standard 01350. Floor coating brought on-site is different as Josh just described. Mostly such coatings are not regarded resilient flooring (EQc4.3) but coating (EQc4.2).