seeing the same EPD formats, you could create a cover sheet with a table of contents like "Validity date- bottom of page 2, ISO standards - top of page 3" and reuse it for multiple EPDs....

Afogreen Build www.afogreenbuild.com Green Building Consultant LEEDuser Premium Member 247 thumbs up December 21, 2021- 5:59 pm Hi James, Most of LEED standard method are using EPA or ISO or ASTM. To meet this credit, you need to find laboratory that can test according to LEED standard method. In our opinion, the test result from the instrument is better to be enclosed within or together with the IAQ...

David Hemming LEEDuser Basic Member November 18, 2021- 6:55 am Hi Caroline, We have our own accredited ISO17025 laboratory in Australia, but use many more around the world.  We have faced similar challenges.  You may want to understand about International Laboratory Accreditation Cooperation  (ILAC) who are the international organisation for accreditation bodies operating in accordance with ISO/IEC 17011 and involved in the accreditation of conformity assessment bodies including calibration laboratories (using ISO/IEC 17025).  Their website may help you find the contact in the country where you have issues.  We...

Dear all, we are facing issues finding a laboratory with ISO/IEC 1702 accreditation to perform the indoor air quality tests. Does someone know if some equivalences are accepted under LEED v4? For example, in India, the NABL accreditation. Thank you! Best regards, Caroline SSc5 ...

3 or less, between 0.5 and 5 mg/m 3, or 5 mg/m 3 or more). Laboratories that conduct the tests must be accredited under ISO/IEC 17025 for the test methods they use. Products used in school classrooms must...

Is it possible to comply with furniture evaluation category by submitting only the furniture laboratory report? The laboratory report demonstrates that the furniture was tested in accordance with ANSI/BIFMA Standard Method M7.1–2011. The laboratory that conducted the tests is accredited under ISO/IEC 17025. EQc2 Guyana ...

v1.2-2017 and documentation should be provided that demonstrates that the laboratory conducting the test is accredited under ISO/IEC 17025 for the test method they used. Generic...

https://www.usgbc.org/leedaddenda/100002473 This one might be hard to use, as a great part of lab reports we usually have were carried out on the ISO 16000 standard, asked by the french mandatory testing, and not on the EN 16516. I know the LEED v4 used to accept this french testing with ISO 16000, but is seems that it is no longer an option under the v4.1 version... For those who have worked with European products, do you know of any label...

I recently had a pecora product rejected from the Adhesives & Sealants category because the reviewer said that the emissions report from Intertek Labs was not valid becuase it did not list Intertek's ISO 17025 certification.  The reviewer said that Intertek was not listed in LEED's Low-Emitting Materials Third Party Certifications Table found here: " https://clearchem.berkeleyanalytical.com/sites/default/files/low-emittin... " The thing about that is that Intertek is listed in the table.  I went ahead and called Intertek and they sent me a copy of their ISO 17025 certification from a company called A2LA. Why...

2018- 10:08 pm Hi Trista, My project is in Singapore. The pest control contractor is certified by the following:- ISO 9001:2015- ISO 14001:2015- OHSAS 18001:2007 Can the vendor be considered certified...