Should the total built up area consider the basemet area as well ?

Can the submeters for optionD are only provided to cover all ECMs. For instance, if we aim to measure the pump energy, the submetering for the pumps will be provided.

Hi, We have a library project and we received the review comments from USGBC and requested to provide the following: 1.

Hello everyone, we are looking at the feasibility of doing LEED for subway stations.

How do I know what my FTE is? I am guessing it is what I am told the occupancy will be. I am working on a LEED CI, existing building with new addition.

Folks, Is there any exception for the 2% and 3% voltage drop? We are working on a subway station and we were able to achieve 3,5% to the feeders and 3% to the to the branch circuits.

We have a major renovation project where the building shares a small parking lot with three other buildings within a campus setting.

For Option D, do we need submetering? and can it be analyzed using only whole building energy? if we required submetering, what level we have to monitored eg HVAC, lighting, process?

If we have some on-site renewable energy (pv and wind), does it get calculated for a net energy use, or does this credit restrict to the total gross baseline amount calculated by the energy model (

My project is a new residential tower (with an underground parking garage), which will be constructed on an existing parking lot that serves an adjacent residential tower.