Log in
Forum
Topic

How does this pilot credit link to the 'process loads' in EA1?

Pilot-Credits EApc3: Medical and process equipment efficiency
posted by Edwin Wealend on Sep 28, 2010, 3:30 am

Hi all,
Im working on a LEED project located in Australia and Im new to the LEED energy model requirements and ASHRAE 90.1. My project is a medical research building, with high process...

Last reply: Marcus Sheffer, Oct 11, 2010, 2:55 pm

Min. Occupancy required for any LEED EBOM Project

EBOM-2009 EAp2: Minimum Energy Efficiency Performance
posted by Bala Srini on Oct 5, 2010, 9:58 am

The occupancy requirement for buildings to earn the ENERGY STAR label has been lowered to 50%. So whats the min. occupancy required for any LEED...

Last reply: Jenny Carney, Oct 11, 2010, 2:44 pm

Post '93 Construction- Requirements?

EBOM-2009 WEp1: Minimum Indoor Plumbing Fixture and Fitting Efficiency
posted by Dianne Herrin on Mar 19, 2010, 1:37 pm

Hi - My building is just over a year old. Am I correct in that all I need to do to meet this prerequisite is:
1-Verify construction date and fixture types (either through construction docs...

Last reply: Jason Franken, Oct 11, 2010, 2:43 pm

Office Tower and Annex Cafeteria/auditorium

EBOM-2009 EAp2: Minimum Energy Efficiency Performance
posted by Michael Chermak on Oct 6, 2010, 2:51 pm

If a LEED project consists of two 9-story office towers and a 3-story cafeteria/auditorium (all connected), what is the best approach for meeting Energy Star rating for the 3-story cafeteria/...

Last reply: Jenny Carney, Oct 11, 2010, 2:42 pm

required Upload for IEQ p1

NC-2009 IEQp1: Minimum indoor air quality performance
posted by Amanda Roelle on Jan 15, 2010, 3:49 pm

Does anyone have a sample for the upload required for IEQ P1:

"Graphic and numeric summary of the airflow analysis performed. Include the boundary conditions used for the analysis,...

Last reply: Tristan Roberts, Oct 11, 2010, 12:58 pm

Compliance with SS Prerequisite 1 for international projects

CS-2009 SSp1: Construction Activity Pollution Prevention
posted by Bilge Ceylan on Oct 11, 2010, 6:32 am

Tristan Roberts Representative Vermont House of Representatives LEEDuser Expert 11473 thumbs up October 11, 2010- 11:06 am There is a good discussion on this topic in the NC SSp1 forum. I would recommend you review that and post back with any additional thoughts/questions.In additon to what's posted there, I do know that USGBC is actively working on this issue; however, there is no official guidance available at this moment. Log in or register to post comments ...

Last reply: Tristan Roberts, Oct 11, 2010, 11:06 am

LEEDuser resources

General forums
posted by Tristan Roberts on Oct 11, 2010, 11:00 am

Hi Summer, since you're here on LEEDuser can I assume you've checked out the templates and other resources here? If not, check the Documentation Toolkits for IEQc4 and MRc4–7. (For example,...

Re: CI phased project because of budget issues

General forums
posted by David Posada on Sep 29, 2010, 1:21 pm

Kevin,
One way to approach this could be to register the project with the square footage and LEED boundary defined as per Phase 1 and hold off on submitting for any review until you know...

Last reply: Tristan Roberts, Oct 10, 2010, 8:03 pm

SSc6.2- Calculate % of Annual Rainfall Treated by BMP

Schools-2009 SSc6.1: Stormwater design - quantity control
posted by Mary Wohnrade on Sep 24, 2010, 10:01 am

I have not found a good example of how you calculate the % of Annual Rainfall Treated by BMP. I'm guessing that...

Last reply: Gregory Hurst, Oct 8, 2010, 5:00 pm

Motorbikes as low emitting and fuel efficient vehicle

EBOM-2009 SSc4: Alternative Commuting Transportation
posted by Tanmay Tathagat on Sep 14, 2010, 5:30 am

In India, substantial number of employees from project building travel through motorbikes generally having following specifications:

Engine: 100cc to 150cc, 4 stroke
Fuel Efficiency...

Last reply: Rick Gehrke, Oct 8, 2010, 2:45 pm