| Topic | Recent |
|---|---|
Electronic Project CoordinationNC-2009 IDc1: Innovation in Designposted by Randy Gould on Feb 16, 2011, 2:38 pm
Has anyone attempted to get an ID point for putting together a narrative that describes project coordination through the use of project management software and electronic conferencing? We have a... Last reply: David Hubka, Mar 7, 2011, 11:42 pm |
|
EAp1EBOM-2009 EAp1: Energy efficiency best management practices - planning, documentation and opportunity assessmentposted by Christopher Kung on Mar 7, 2011, 11:54 am
We did our in house Level 1 Walk Through in 2007 and we got the Energy Label. After that we did in house Level1 Walk Through every year and in put data to Energy Star but we did not apply the... Last reply: David Hubka, Mar 7, 2011, 10:42 pm |
|
FSC and Onsite Harvested WoodNC-2009 MRc7: Certified Woodposted by Lee Dingemans on Jun 3, 2010, 9:03 am
... Last reply: Jennifer Frey, Mar 7, 2011, 9:20 pm |
|
Garbage disposals with on-site wastewater treatment?Schools-2009 WEc4: Process water use reductionposted by Anya Fiechtl on Mar 7, 2011, 2:18 pm
The intent for this credit is "To maximize water efficiency within buildings to reduce the burden on municipal water supply and wastewater systems." The principal at our school was not... Last reply: Suzanne Painter-Supplee, LEED AP+ID&C, Mar 7, 2011, 7:48 pm |
|
Limiting access once the building is enclosedNC-2009 IEQc3.1: Construction IAQ management plan - during constructionposted by Vanessa Seibert on Mar 7, 2011, 12:32 pm
Our experience on projects is that limiting the access to one door with a long, regularly cleaned carpet, is expected by the LEED reviewer. We are currently working on a three story building and... Last reply: Vanessa Seibert, Mar 7, 2011, 5:52 pm |
|
DSIRE...General forumsposted by Tristan Roberts on Mar 7, 2011, 4:34 pm
DSIRE is the best nationwide resource on incentives like this. I would start there. |
|
Exhausted heatNC-2009 EAc1: Optimize Energy Performanceposted by Kath Williams on Mar 3, 2011, 12:42 pm
Can a LEED project use exhausted/waste heat (and claim credit of some kind) from an adjacent building that is not being included in LEED project boundary? Last reply: Marcus Sheffer, Mar 7, 2011, 4:33 pm |
|
SLL Prereq 1General forumsposted by Peter Doo on Feb 26, 2011, 8:56 pm
I'm working on a predeveloped 95 acre site at the end of a peninsula. One drives through and existing residential neighborhood that does not have many diverse uses. The existing site was a... Last reply: Ted Bardacke, Mar 7, 2011, 2:57 pm |
|
Systems Furniture Panel FabricCI-2009 IEQc4.5: Low-emitting materials - systems furniture and seatingposted by Lori Selcer on Feb 21, 2011, 7:14 pm
We have specified panel sysems for our project which are Greenguard certified. However we are using COM fabric for the panels, that is, we are using fabric from another manufacturer. While the... Last reply: Randal Carter, Mar 5, 2011, 8:54 am |
|
Savings calculationsCI-2009 EAc1.3: Optimize energy performance - HVACposted by Sundararaj Subburaman on Feb 9, 2011, 2:04 am
Our client is occupying the 8th floor of a G+8 building. The central plant is a combination of Air cooled and water cooled chillers. The conditioned area of the project area alone is 45,000 sqft... Last reply: Sundararaj Subburaman, Mar 4, 2011, 11:57 pm |
