Good morning

I have a question relating thermal comfort in a hotel building.

The protocol require to have thermal comfort controls allow occupant whether in individual spaces or...

I am working on a Hotel that has a laundry facility on-site for guest use, and also offers valet dry-cleaning services and grocery shopping services for guests. Am I able to count any of these...

There is an adhesive that the manufacturer claims is 0 g/L of...

What are the LEED certification requirements for an industrial kitchen/dining room?
Indications for typical equipment such as ovens, fryers, dishwashers and stoves. In the LEED credit...

Hello,

Are materials used in loading bays required to be submitted under the low-emitting materials credit?

For our project, the loading bay is accessed through a garage door and is...

Hello,

I am performing an energy modelling for a C&S building.
When filling in the exterior lighting data in the "Lighting" tab, Tradable Surfaces, it seems that the values ​​...

Hi,

We are performing energy modelling for an airport. We have the Heat Load Summary Sheet where the Minimum Outdoor Air Requirement is taken with 30% excess to ASHRAE 62.1...

Hello,

We are proposing a green wall for our project, which will require irrigation and must adhere to the guidelines outlined in Option 2 of this credit. However, we were unable to locate...

I'm working on a project that is an expansion of an existing building, primarily adding a few levels on top. The cooling and heating energy of the expansion exceeds 10% of total energy use so...

Hi, 
 

I am working on a LEED ID+C V4project , we dont have existing construction details for the building and the building was constructed in 1970, What should i assume for building...