I have a project that recieved LEED BD+C: New Construction v2 - LEED 2.2 in 2014. They recieved a credit for water reduction with low flow toilets. 

We have a five-acre site with multiple buildings. However, we are pursuing certification for only one of the buildings. Does the entire site have to meet the prerequisite?

My project is an office tenant fitout (1 floor in a high-rise building).

I have several pre-rinse spray valves that were specified by an external laboratory consultant in a college laboratory building that do not appear to meet the requirement of being less than or equa

Hello all and a happy new year, I am wondering if anyone knows of a thermostat that can also measure and display humidity and CO2 levels? We are trying to find a way to cut down on the number of s

HI there, Would the apparatus bay of a fire department need to be included in the building flush-out? I see a typical garage would not need to be included but this isn't a typical garage.

If air economizers are not required to be modeled in the baseline system due to climate zone (4a) can you model the proposed with economizers if in design and not model economizers in the baseline?

I was just wondering if anyone else has used the Ornilux Bird Protection Glass on their projects. If so - have you found it to be as effective as you thought it would be?

we are a GC on a LEED NC v2009 project. we'll be doing both IAQ testing as well as a limited flush out, not nearly the Air exchanges for just doing flush out.

We our developing a brownfield site.There is no annual increase in runoff volume from the pre development cover condition to the post developed condition.