Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

PROJECTION FACTORS FOR VERTICAL FINS

CS-v4 EAp2:Minimum energy performance
posted by  Fotis Kotsopoulos  on 

Dear all,

Is it possible to correlate vertical fins with projection factors shown in table 5.5.4.4.1 ASHRAE 90.1-2010?

 

FK 

1
Wed Apr 15, 2020, 5:22 pm

Entryway System in TSLA

CS-v4 EQc1:Enhanced indoor air quality strategies
posted by  Brightworks Sustainability  on 

My CS v4 project wants to pursue Enhanced IAQ Strategies but we are not responsible for installing entryway systems or walk-off mats.

4
Default Avatar
Sustainability Engineer
Ecosolutions
LEEDuser Basic Member
6 thumbs up
Thu Mar 26, 2020, 3:57 pm

Thermal Comfort Control - Open Office Area

NC-v4 EQc5:Thermal comfort
posted by     on 

We are working on a new media center for a University in Hawaii.  In our second review, we were asked to list out individual workstations in our only Individual Occupant Space, rather than the

2
Thu Mar 26, 2020, 3:44 pm

WE Prerequisite 1

EBOM-v4 WEp1:Indoor water use reduction
posted by  Alice Andersen  on 

I have a lavatory faucet that are automatically controlled (sensor control) and a flow rate of 5 l per minute. In accordance to the LEED manual the baseline is 1.9 l per minte.

0
2
Default Avatar
Sustainability Coordinator
ecoSolutions
LEEDuser Basic Member
3 thumbs up
Thu Mar 26, 2020, 3:24 pm

Qualifying compliance to Extreme Heat design parameters

Pilot-Credits IPpc99:Design for Enhanced Resilience
posted by  Jolene McLaughlin  on 

Does anyone have a view of what would qualify to meet some of the subjective requirements in the Extreme Heat design measures?

1
Tue Jan 7, 2025, 1:42 am

No separate meter for water performance

EBOM-v4 WEc4:Water metering
posted by  Phung NGUYEN  on 

Our Office located in a group building of manufacturing was having one main meter that measures the total potable water. 

0

Mixed-use in LEED Core & Shell

LEED Rating System Selection
posted by  Anke Koch  on 

Hi, our project is a new mixed-use building (residential / retail / offices) in the center of Berlin, Germany.

6
Executive Director of Technical Services
Paladino and Company
LEEDuser Basic Member
3 thumbs up
Thu Mar 26, 2020, 12:56 pm

Wallcovering Adhesive - LEED Compliant

SD Leaders
posted by  Douglas Flandro  on 

We are having trouble sourcing a LEED compliant wallcovering adhesive. We specified Roman Pro-880 which is low VOC but doesn't have sufficient back up for TVOCs.

0

Duct sealants and wallpaper emissions testing

CI-v4 EQc2:Low emitting materials
posted by  Kathleen Gaffney  on 

Are duct sealants and wallpaper required to have emissions testing documentation with TVOC in addition to VOC contents found in the MSDS?

1
Fri Jun 5, 2020, 6:14 pm