The alternative documentation process for FSC as described in V4 on page 534 is confusing: The issues in particular are: - The woodworker must install the product.

My team and I were recently successful in documenting the use of carbon offsets for LEED CI - EAc4 Green Power by documenting the V4 credit as an alternative compliance path.

I wonder if there is a standard to convert C-factor to U-factor or F-factor to U-factor. Is there a guideline to do so? Since not all energy program can let you input C, U, F as you desire.

Dear all, We have a school campus project (LEED NC MB) in Shanghai. The cooling source is from central cooling plant and the heating source is from Municipal steam.

Dear All, I’m modelling a water centrifugal chiller in System 8 of ASHRAE 90.1 (Appendix G), using HAP by Carrier. I have to need how calculate the minimum entering condenser water temperature (ECW

Hi, we just received our final review, but we like yo get one more point to have 80 points instead of 79.

I am working on 14,000sq ft 8 story historic high profile project in NYC that is keeping almost 100% of the exterior skin and framing but is removing almost all of the structural floor and roof dec

If a site has a number of buildings already under construction and substantially complete, the design for most of which does not consider LEED requirements, and the client decides to pursue LEED ND

I am project admin for a V3-2009 NC project and wondered if anyone had issues with energy modeling software and accuracy of results with complicated/unique systems?

We are building an addition to an existing non-LEED building and only adding a wall in the existing building. Originally we were going for LEED v2009 NC and now switched to EBOM.