Should we use the power...

I have a Tenant Improvement that has...

Hi There,

We are looking into a project which an office building and is going to be LEED certified. The project is air conditioned by air cooled screw chillers (2 Nos of 250 Tons each)....

I am working on a multifamily building. The proposed system is a Rooftop unit with constant vlume and 100% outdoor air. No return or exhaust and a set SA CFM.
My question is whether in...

While modeling the building in the space-by-space method, there are a couple of closets that are not conditioned, therefore have been model as unconditioned in TRACE 700. These spaces have...

I have two questions concerning Task Lighting:

1- for an office building, should I count task lighting as process load?

2- For Base-case Simulation, does the...

Apart from LEED/USGBC,
I want to design a pump which can supply hot water at each floor's apartment for space heating (of total 20 floor). what will be the head? is it the height of the...

Common sense tells me they are not interested in by the second peak energy demands for each end user...so to ask the stupid question: Which average value should I output here...hourly average...

We are working on a project with a bus repair...

HVAC plans show the room setpoint. This should be the OPERATIVE temperature. However, most thermostats are sampling AIR TEMPERATURE, and that goes to say most conditioning equipment controls are...