Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

CS requirements for office space

CS-v4 EQc1:Enhanced indoor air quality strategies
posted by  Timothy Ian Middleton  on 

We have an office building project. Circulation, F&B and reception areas have high enough density that they will require CO2 sensors for this credit.

0

Option 2 A Exterrior contamination prevention - software

CS-v4 EQc1:Enhanced indoor air quality strategies
posted by  Przemysław Rejczak  on 

Dear everyone,

Could you please inform which is the most reasonable software to prepare CFD analysis to show Exterrior Contamination Prevention compliance?

1
Sat Nov 23, 2019, 3:03 am
34
Sr. Sustainability Manager
Hensel Phelps
LEEDuser Basic Member
10 thumbs up
Thu Nov 7, 2019, 4:04 pm
3
Senior Mechanical Engineer
Metec Consulting Engineers
LEEDuser Basic Member
2 thumbs up
Tue Nov 12, 2019, 6:47 pm

Automatic Daylighting Controls for guest rooms (hotel) in Section 9.4.1.4

NC-2009 EAp2:Minimum Energy Performance
posted by  Laia Pons  on 

I have a Hotel with guest rooms bigger than 23 m2, could anybody advise if all the guest rooms (enclosed spaces bigger than 23 m2) should have Automatic Daylighting Controls ?

1
Fri Nov 15, 2019, 2:33 pm

Community revitalization program and its compliance with Option 2

Warehouses-NC-v4 LTc3:High priority site
posted by  Agnieszka Rylska  on 

We are engaged in LEED certification process of the distribution center located in the area which is covered by current community revitalization program.

2
Sustainable Design Lead
CannonDesign
LEEDuser Expert
379 thumbs up
Tue Nov 12, 2019, 4:28 pm

Group certification - calculating and placing bike racks

CS-v4 LTc6:Bicycle facilities
posted by  Barbora Cicvárková  on 

Hi all,

we are pursuing group certification for project with 5 separated above ground buildings (section A,B,C,D,E) connected with underground parking garages.

5
Integrated Design & LEED Specialist
SERA Architects
LEEDuser Expert
1361 thumbs up
Mon Nov 11, 2019, 12:20 pm

Can mixed paper and corrugated cardboard be collected and stored together?

CS-v4 MRp1:Storage and collection of recyclables
posted by  Erkki Seinre  on 

According to this prerequisite, the project should have dedicated areas for the collection and storage of mixed paper, corrugated cardboard, glass, plastics, metals, plus two or more waste streams

2
Sustainable Design Lead
CannonDesign
LEEDuser Expert
379 thumbs up
Mon Nov 11, 2019, 9:19 am
5
Construction Administrator/ LEED AP
Bywater Woodworks, Inc.
LEEDuser Basic Member
42 thumbs up
Sun Nov 10, 2019, 6:05 pm