Hello All,

This is not a question, however, as there have been a few questions regarding calibration and how often it needs to be done.  It took some time, however, after speaking to a...

Hello LEEDusers,

It’s the first time I work on a LEED credit. The project is a new construction (NC-2009) and we aim for the Water Performance Measurement (WEc1) of an existing building in...

How i can calculate the use of water in a college building?

Hi all,

We have a case where there is an office ("main" building) and a separate parking garage (that serves the office) within LEED project boundary.
In that parking garage, there...

We are working on a project where the building meter is owned by the utility authority. in the second week of performance period, the meter stopped functioning and the client contacted the...

Per the LEED Credit Library, there seems to be confusion, or room for interpretation, on how to pursue Whole Building Water Performance Measurement for an Innovation credit in BD+C projects. (...

How does...

Our project is a large office building with commercial kitchen (in house breakfast/lunch, etc). The building has hot water heaters for the kitchen, and a hot water heaters for everything else (...

Finding very difficult to get manufacturer recommended calibration intervals.
Is there a code or governing body that can be used as a guide such as NSF or AWWA

Our project if a large office building with approximately 1200 employees.

We have a whole building water meter and a domestic hot water meter. If we add a meter into the commercial...