Forum quick links
Onsite Non-potable Water Reuse Guide is out!
posted by Clark Brockman on
You can download the guide here:
https://www.collaborativedesign.org/
Recessed mats
NC-2009 IEQc5:Indoor Chemical and Pollutant Source Controlposted by Heather Holdridge on
We are considering using a recessed coir walk-off mat for a LEED project. It will be recessed with a stainless border. Does this count as a roll-out mat and would require weekly maintenance?
Site LEED Boundary
CS-v4 SSc2:Site development - protect or restore habitatposted by Ricardo Sá on
Dear All,
Project with only one parking space
NC-v4 LTc7:Reduced parking footprintposted by Ricardo Sá on
If a project has only one car parking space (and assuming that this number is wel below Parking Consulting Council recommendations for the project type) how can it comply with LTc7 (c
Baseline Ventilation Rate for Proposed design with DCV (not required under 6.4.3.9)
CS-2009 EAp2:Minimum Energy Performanceposted by Iqbal Khalilullah on
Dear Marcus,
I wish to ask you regarding the Baseline Ventilation rate.
Paints - epoxy covering: car parks pavements
NC-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatingsposted by Ricardo Sá on
Hi there, I am working on a project that specified a paint for a covered car park pavements that is an epoxy covering using for pavement's signals.
LEED ACP Pilot Credits
posted by Allison Wilson on
I'm in search of anyone who's done a LEED ACP Pilot Credit.
More Than One Commingled Waste Hauler on a Job - 2 Streams?
NC-v4 MRc5:Construction and demolition waste managementposted by Patty Lloyd on
Hi, if a project has a demolition subcontractor who hires a commingled waste hauler for some of the demolition debris, and then during the construction phase of the project the GC hires a commingle
remote access
NC-v4 EAc3:Advanced energy meteringposted by Antonio Macedo Filho on
I'd like to know if the BMS collecting the meter data would already meet the requirement of remote access to the data or this data should be avaiable for all ocupants.