We are working on a project involving an office building with a kitchen with a total area of 50 square meters. We don
According to the LEED v4 guidelines, only residential kitchens are...

Should the entrance area of a hotel room (small area (

The LEED Reference Guide does not specify a grid size for daylight...

Hello everyone,

We are doing Daylight simulation with IES-VE software in compliance with LEED daylighting Option 1.

We know that it is required two sets of simulations with and...

I have a residential project aiming for certification under LEED v4 NC BD+C (the buildings are over 8 floors). The Daylight credit includes "Provide manual or automatic (with manual override)...

Hello, 

I have a question regarding the glare control strategies. the building that I'm working on came out with a result of 46.2% ASE1000/250 which is quite high (most spaces are overlit...

Hi,

Could you please guide me with the following:
When performing a daylight simulation for option 2, do we need to assess the total floor area of each space? Or do we assess only ...

As per Version 4.1, IEQ Credit-Daylight: Options 2, Illuminance calculations. 

it is asked to perform daylight simulation for 9 a.m and 3 p.m on a clear-sky day at the equinox. should we...

Are glare control devices required only on exterior glazing?

Let's say we have an office (regularly occupied) with a single window looking to a classroom and no exterior glazing. Does this...

in the Forum.  Default Revit materials are a very good start, but when you want to define very specific glazing performance, please refer to the Forum post here: https://forums.autodesk.com/t5/lighting-solar-analysis-forum/critical-up... Log in or register to post comments Zahra Mirian LEEDuser Basic Member July 24, 2019- 4:53 pm Thanks for your response David, I have the latest version of Insight on my Revit 2019. I have cleaned up...