I have a residential project aiming for certification under LEED v4 NC BD+C (the buildings are over 8 floors). The Daylight credit includes "Provide manual or automatic (with manual override)...

Hello, 

I have a question regarding the glare control strategies. the building that I'm working on came out with a result of 46.2% ASE1000/250 which is quite high (most spaces are overlit...

Hi,

Could you please guide me with the following:
When performing a daylight simulation for option 2, do we need to assess the total floor area of each space? Or do we assess only ...

As per Version 4.1, IEQ Credit-Daylight: Options 2, Illuminance calculations. 

it is asked to perform daylight simulation for 9 a.m and 3 p.m on a clear-sky day at the equinox. should we...

Are glare control devices required only on exterior glazing?

Let's say we have an office (regularly occupied) with a single window looking to a classroom and no exterior glazing. Does this...

requirements for defining glazing visible transmittance (TVis) than documented for prior versions of Insight Lighting in the Forum.  Default Revit materials are a very good start, but when you want to define very specific glazing performance, please refer to the Forum post here: https://forums.autodesk.com/t5/lighting-solar-analysis-forum/critical-up... Log in or register to post comments Zahra Mirian...

Hi to All Experts,

some opertaive clarifications will be really appreciate: pursuing the credit through option 2

1. Do I have to select for the whole building the worst case form...

Does anyone know if we are required to take light meter measurements with the interior lights on or off?  I am assuming they need to be off but since the lighting has occupancy and daylighting...

Dear all,

we are currently working on a research laboratory, which contains normal daylighted office spaces and enclosed laboratory spaces. The occupants will switch between their desk and...

Hi, 

When asked to taking into account daylight saving time to perform...